White Gauges Question............
#1
White Gauges Question............
Im all set and ready to go with the "home made" white gauges from the posts. One thing not mentioned is that I have a 1989 IROC with a 110 speedo and the Images that I got for the mod goes to 140 on the speedo. Will this work with out making my 110 inacurate?
what I mean is, when IM\m going 50MPH am I really doing 40 or 60 MPH?
------------------
1989 IROC-Z Convertible, 305 TPI 5-Speed 97,000 milez. all stock inside and out, No Modz, very clean ride!
what I mean is, when IM\m going 50MPH am I really doing 40 or 60 MPH?
------------------
1989 IROC-Z Convertible, 305 TPI 5-Speed 97,000 milez. all stock inside and out, No Modz, very clean ride!
#3
Senior Member
Join Date: Jan 2001
Location: Long Island, NY U.S.
Posts: 708
Likes: 0
Received 0 Likes
on
0 Posts
I feel your pain. I cannot find white faced gauges for my '83 TA anywhere. I want the home made ones with the bird in the center...Soulbounder made them and they look great. I just hope that somehow I can get them on my car.
James
James
#4
Yes that will mess you up, there is gauge files for your 110 speeedo, mine is a 115, look closer 110 is the last big number but 115 is small print. CLICK HERE MAN,
http://www.mikekey.net/fbody/whitegauges
Go download my files
------------------
un4givin89
1989 Camaro Ralley Sport, 305 TBI 5 Liter v8
Project List:
Crate 383 Engine
Flowmaster Exhaust
New Tires
Windows tinted
Interior swapped for two tone colors
Lowering Springs
Sound System
www.mikekey.net
http://www.mikekey.net/fbody/whitegauges
Go download my files
------------------
un4givin89
1989 Camaro Ralley Sport, 305 TBI 5 Liter v8
Project List:
Crate 383 Engine
Flowmaster Exhaust
New Tires
Windows tinted
Interior swapped for two tone colors
Lowering Springs
Sound System
www.mikekey.net
#5
Thanx, theres that image file I was lookin for. Im going to alter it just a bit if you dont mind, I want to add the KPH on the inside like the original one.
Ill post pics after Im done. Plus Im gonna change the bulbs while Im in there, Im going to have to experiment a bit with those, Im going to try different colorz.
Thanx again.......Bombero
Ill post pics after Im done. Plus Im gonna change the bulbs while Im in there, Im going to have to experiment a bit with those, Im going to try different colorz.
Thanx again.......Bombero
#6
I was just updating the file today after you mentioned it to include the orginal I had and a few other speedos for different makes!
------------------
un4givin89
1989 Camaro Ralley Sport, 305 TBI 5 Liter v8
Project List:
Crate 383 Engine
Flowmaster Exhaust
New Tires
Windows tinted
Interior swapped for two tone colors
Lowering Springs
Sound System
www.mikekey.net
------------------
un4givin89
1989 Camaro Ralley Sport, 305 TBI 5 Liter v8
Project List:
Crate 383 Engine
Flowmaster Exhaust
New Tires
Windows tinted
Interior swapped for two tone colors
Lowering Springs
Sound System
www.mikekey.net
#7
Supreme Member
Join Date: May 2001
Location: Orange, CT, USA
Posts: 1,074
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1983 Pontiac Firebird
Engine: 400HP 350
Transmission: 700R4
Axle/Gears: 3.42
I found cheap white faced gauges for a firebird go here
http://members.aol.com/anniversarygt350/gm.htm
------------------
Chevy 2.8L 60° V6
Mods:
?K&N Filter Lid
?87 Formula Hood
?Bosch Platinum +4
?Hi-Flo CatCo CAT
?Flowmaster 80 Series Muffler
?83 Trans Am 15x7 Turbo Fin Wheels
?B.F.Goodrich Radial T/A 225/60-15
?Chevy 2.8L Heddman Headers (Going on soon)
Aol instant messenger: FIREAM
http://www.geocities.com/fiream/RobsCarArtPa.html?994187591828
http://members.aol.com/anniversarygt350/gm.htm
------------------
Chevy 2.8L 60° V6
Mods:
?K&N Filter Lid
?87 Formula Hood
?Bosch Platinum +4
?Hi-Flo CatCo CAT
?Flowmaster 80 Series Muffler
?83 Trans Am 15x7 Turbo Fin Wheels
?B.F.Goodrich Radial T/A 225/60-15
?Chevy 2.8L Heddman Headers (Going on soon)
Aol instant messenger: FIREAM
http://www.geocities.com/fiream/RobsCarArtPa.html?994187591828
Trending Topics
#8
Here's a few pics of my homemade white gauges. The pictures REALLY suck and are pretty blurry, but I will get better ones.
------------------
82 Z28 383, Ported 215cc Dart Iron Eagle Heads 72 cc Comb. Chambers, Comp custom grind Hyd roller cam, Speed Pro .250" domes, Wheeler Motorsports 4340 I beam rods, Eagle 5140 steel crank, Weiand Team G intake, Holley 830 DP, hedman headers
Trans: Turbo 350 w/ 4000 stall -- Rearend 7.5 w/ Richmond 4.10's, Auburn Minispool
Best ET:11.60 @ 114.56, w/ a 7.34 1/8 @ 93.50, and a 1.622 60'
89 RS, L03 305, Hypertech Chip,cat delete, Dynomax exhaust,K&N open element Filter,160 stat, MSD coil --Trans:700R4 Corvette Servo -- Rearend: 7.5 GM 3.42 w/ posi-lock
Bassett Racing
------------------
82 Z28 383, Ported 215cc Dart Iron Eagle Heads 72 cc Comb. Chambers, Comp custom grind Hyd roller cam, Speed Pro .250" domes, Wheeler Motorsports 4340 I beam rods, Eagle 5140 steel crank, Weiand Team G intake, Holley 830 DP, hedman headers
Trans: Turbo 350 w/ 4000 stall -- Rearend 7.5 w/ Richmond 4.10's, Auburn Minispool
Best ET:11.60 @ 114.56, w/ a 7.34 1/8 @ 93.50, and a 1.622 60'
89 RS, L03 305, Hypertech Chip,cat delete, Dynomax exhaust,K&N open element Filter,160 stat, MSD coil --Trans:700R4 Corvette Servo -- Rearend: 7.5 GM 3.42 w/ posi-lock
Bassett Racing
#9
<font face="Verdana, Arial" size="2">Originally posted by Jims83TA:
I feel your pain. I cannot find white faced gauges for my '83 TA anywhere. I want the home made ones with the bird in the center...Soulbounder made them and they look great. I just hope that somehow I can get them on my car.
James</font>
I feel your pain. I cannot find white faced gauges for my '83 TA anywhere. I want the home made ones with the bird in the center...Soulbounder made them and they look great. I just hope that somehow I can get them on my car.
James</font>
EDIT: here is the link -----> http://members.aol.com/rmacewen1/
------------------
- Mike Harvey -
1986 Firebird S/E
[This message has been edited by Mike Harvey (edited August 26, 2001).]
#10
Senior Member
Join Date: Jul 2001
Location: Valley Head, AL
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Camaro "SC-350"
Engine: Mild 350 4-bolt
Transmission: 700R4 w/ TCI Stall
<font face="Verdana, Arial" size="2">Originally posted by bombero437:
Plus Im gonna change the bulbs while Im in there, Im going to have to experiment a bit with those, Im going to try different colorz.</font>
Plus Im gonna change the bulbs while Im in there, Im going to have to experiment a bit with those, Im going to try different colorz.</font>
------------------
1983 Camaro Sport Coupe
Charcoal exterior/light sand gray interior, Console clock, Power hatch release, Gauge option, Spoiler, and no darn rpo or build sheets!
No Motor or tranny......yet!
1964 Impala Super Sport,
327/Powerglide, Daytona Blue Metallic/Blue interior
[This message has been edited by fast83camaro (edited August 27, 2001).]
#11
Would a template be in there for a 305 carburated with the 4 speed and twin needled 85mph speedo by any chance? =(
------------------
Nobody ever got cancer from smoking tires!
If you aren't living on the edge, you're just taking up space
gibsandwich@hotmail.com
www.icq.com : #18562788
----------------------------
1982 Z28 Camaro
305 Carburated
Muncie 4-speed
2.5" Stainless steel exhaust all the way through
Fibreglass hood
Boston 4x6" CX7e 2-ways
6x9" Nippon America (no-name?) 3-ways
Other stuff I haven't figured out yet.
------------------
Nobody ever got cancer from smoking tires!
If you aren't living on the edge, you're just taking up space
gibsandwich@hotmail.com
www.icq.com : #18562788
----------------------------
1982 Z28 Camaro
305 Carburated
Muncie 4-speed
2.5" Stainless steel exhaust all the way through
Fibreglass hood
Boston 4x6" CX7e 2-ways
6x9" Nippon America (no-name?) 3-ways
Other stuff I haven't figured out yet.
#12
Fast83Camaro, You DO NOT need to paint the blue reflective color on the back of the guages. I have red bulbs in my 82, and it still has the blue on the backside of the bezel. They shine very brightly on the face of the guages, and they look good.
Gib Sandwich, I'm working on on right now. I took out my factory dual needle and started turning it white with Picture It. I'll E mail it to you when I finish it.
------------------
82 Z28 383, Ported 215cc Dart Iron Eagle Heads 72 cc Comb. Chambers, Comp custom grind Hyd roller cam, Speed Pro .250" domes, Wheeler Motorsports 4340 I beam rods, Eagle 5140 steel crank, Weiand Team G intake, Holley 830 DP, hedman headers
Trans: Turbo 350 w/ 4000 stall -- Rearend 7.5 w/ Richmond 4.10's, Auburn Minispool
Best ET:11.60 @ 114.56, w/ a 7.34 1/8 @ 93.50, and a 1.622 60'
89 RS, L03 305, Hypertech Chip,cat delete, Dynomax exhaust,K&N open element Filter,160 stat, MSD coil --Trans:700R4 Corvette Servo -- Rearend: 7.5 GM 3.42 w/ posi-lock
Bassett Racing
[This message has been edited by Basett_Racing (edited August 27, 2001).]
Gib Sandwich, I'm working on on right now. I took out my factory dual needle and started turning it white with Picture It. I'll E mail it to you when I finish it.
------------------
82 Z28 383, Ported 215cc Dart Iron Eagle Heads 72 cc Comb. Chambers, Comp custom grind Hyd roller cam, Speed Pro .250" domes, Wheeler Motorsports 4340 I beam rods, Eagle 5140 steel crank, Weiand Team G intake, Holley 830 DP, hedman headers
Trans: Turbo 350 w/ 4000 stall -- Rearend 7.5 w/ Richmond 4.10's, Auburn Minispool
Best ET:11.60 @ 114.56, w/ a 7.34 1/8 @ 93.50, and a 1.622 60'
89 RS, L03 305, Hypertech Chip,cat delete, Dynomax exhaust,K&N open element Filter,160 stat, MSD coil --Trans:700R4 Corvette Servo -- Rearend: 7.5 GM 3.42 w/ posi-lock
Bassett Racing
[This message has been edited by Basett_Racing (edited August 27, 2001).]
#13
Senior Member
Join Date: Jul 2001
Location: Valley Head, AL
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Camaro "SC-350"
Engine: Mild 350 4-bolt
Transmission: 700R4 w/ TCI Stall
Sorry Man, just thought you might have to paint it, but I guess its just to help the reflectability of the light. By the way where is Valley, Alabama? I'm in Valley Head.
------------------
1983 Camaro Sport Coupe
Charcoal exterior/light sand gray interior, Console clock, Power hatch release, Gauge option, Spoiler, and no darn rpo or build sheets!
No Motor or tranny......yet!
1964 Impala Super Sport,
327/Powerglide, Daytona Blue Metallic/Blue interior
------------------
1983 Camaro Sport Coupe
Charcoal exterior/light sand gray interior, Console clock, Power hatch release, Gauge option, Spoiler, and no darn rpo or build sheets!
No Motor or tranny......yet!
1964 Impala Super Sport,
327/Powerglide, Daytona Blue Metallic/Blue interior
#14
Fast83Camaro, I'm in Central, AL., about 18 miles from Auburn, and about 3 miles from the Ga. State line. The Chattahoochee basically runs in my back yard!! The nearest town in Ga. next to us is West Point. Where is Valley Head located??
Gib Sandwich,
My 82 Z28 dual needle speedo has white numbers on one side, and orange numbers on the other, I'm assuming yours is the same. What color do you want the numbers on the whiteface that I am making?? Also, do you want the the warning lines from 55 - 85 MPH, and 90 - 140 KPH?? And will you be retaining both the trip odometer and odometer, or just one or neither?? Give me a few details so I can make it like you want it. I also changed the fonts to the Eurostyle lettering, so it will match the tach,fuel,volt,oil press. of Mike Key's templates. 1982's had a different font than 83-up, but I am changing it to 83-up for convenience.
------------------
82 Z28 383, Ported 215cc Dart Iron Eagle Heads 72 cc Comb. Chambers, Comp custom grind Hyd roller cam, Speed Pro .250" domes, Wheeler Motorsports 4340 I beam rods, Eagle 5140 steel crank, Weiand Team G intake, Holley 830 DP, hedman headers
Trans: Turbo 350 w/ 4000 stall -- Rearend 7.5 w/ Richmond 4.10's, Auburn Minispool
Best ET:11.60 @ 114.56, w/ a 7.34 1/8 @ 93.50, and a 1.622 60'
89 RS, L03 305, Hypertech Chip,cat delete, Dynomax exhaust,K&N open element Filter,160 stat, MSD coil --Trans:700R4 Corvette Servo -- Rearend: 7.5 GM 3.42 w/ posi-lock
Bassett Racing
Gib Sandwich,
My 82 Z28 dual needle speedo has white numbers on one side, and orange numbers on the other, I'm assuming yours is the same. What color do you want the numbers on the whiteface that I am making?? Also, do you want the the warning lines from 55 - 85 MPH, and 90 - 140 KPH?? And will you be retaining both the trip odometer and odometer, or just one or neither?? Give me a few details so I can make it like you want it. I also changed the fonts to the Eurostyle lettering, so it will match the tach,fuel,volt,oil press. of Mike Key's templates. 1982's had a different font than 83-up, but I am changing it to 83-up for convenience.
------------------
82 Z28 383, Ported 215cc Dart Iron Eagle Heads 72 cc Comb. Chambers, Comp custom grind Hyd roller cam, Speed Pro .250" domes, Wheeler Motorsports 4340 I beam rods, Eagle 5140 steel crank, Weiand Team G intake, Holley 830 DP, hedman headers
Trans: Turbo 350 w/ 4000 stall -- Rearend 7.5 w/ Richmond 4.10's, Auburn Minispool
Best ET:11.60 @ 114.56, w/ a 7.34 1/8 @ 93.50, and a 1.622 60'
89 RS, L03 305, Hypertech Chip,cat delete, Dynomax exhaust,K&N open element Filter,160 stat, MSD coil --Trans:700R4 Corvette Servo -- Rearend: 7.5 GM 3.42 w/ posi-lock
Bassett Racing
#16
BlkZ28,
Sure, but I do need to know how exactly you (and Gib) would like it. I can change colors, take out odometer spaces, add chevy Bowties, or probably most any thing else pretty easily, but I just know to know the specifics. As you can see in the pics below, I opted to take out my trip odometer and odometer for a cleaner look. I also added the "BRE" logo that I put on all my custom parts and race engines. Just lemme know.
P.S. If anyone else needs a template of of the early dual needle speedo, just post your request here , or E mail me.
------------------
82 Z28 383, Ported 215cc Dart Iron Eagle Heads 72 cc Comb. Chambers, Comp custom grind Hyd roller cam, Speed Pro .250" domes, Wheeler Motorsports 4340 I beam rods, Eagle 5140 steel crank, Weiand Team G intake, Holley 830 DP, hedman headers
Trans: Turbo 350 w/ 4000 stall -- Rearend 7.5 w/ Richmond 4.10's, Auburn Minispool
Best ET:11.60 @ 114.56, w/ a 7.34 1/8 @ 93.50, and a 1.622 60'
89 RS, L03 305, Hypertech Chip,cat delete, Dynomax exhaust,K&N open element Filter,160 stat, MSD coil --Trans:700R4 Corvette Servo -- Rearend: 7.5 GM 3.42 w/ posi-lock
Bassett Racing
Sure, but I do need to know how exactly you (and Gib) would like it. I can change colors, take out odometer spaces, add chevy Bowties, or probably most any thing else pretty easily, but I just know to know the specifics. As you can see in the pics below, I opted to take out my trip odometer and odometer for a cleaner look. I also added the "BRE" logo that I put on all my custom parts and race engines. Just lemme know.
P.S. If anyone else needs a template of of the early dual needle speedo, just post your request here , or E mail me.
------------------
82 Z28 383, Ported 215cc Dart Iron Eagle Heads 72 cc Comb. Chambers, Comp custom grind Hyd roller cam, Speed Pro .250" domes, Wheeler Motorsports 4340 I beam rods, Eagle 5140 steel crank, Weiand Team G intake, Holley 830 DP, hedman headers
Trans: Turbo 350 w/ 4000 stall -- Rearend 7.5 w/ Richmond 4.10's, Auburn Minispool
Best ET:11.60 @ 114.56, w/ a 7.34 1/8 @ 93.50, and a 1.622 60'
89 RS, L03 305, Hypertech Chip,cat delete, Dynomax exhaust,K&N open element Filter,160 stat, MSD coil --Trans:700R4 Corvette Servo -- Rearend: 7.5 GM 3.42 w/ posi-lock
Bassett Racing
#17
This is a rough sample. I can make the "kph" and the numbers on that side red, or some other color(the factory ones were orange) and you could maybe paint that side of the needle red or whatever. I can take out the odometer cutouts, trip odometer **** cut-out or bright lights cut-out.
------------------
82 Z28 383, Ported 215cc Dart Iron Eagle Heads 72 cc Comb. Chambers, Comp custom grind Hyd roller cam, Speed Pro .250" domes, Wheeler Motorsports 4340 I beam rods, Eagle 5140 steel crank, Weiand Team G intake, Holley 830 DP, hedman headers
Trans: Turbo 350 w/ 4000 stall -- Rearend 7.5 w/ Richmond 4.10's, Auburn Minispool
Best ET:11.60 @ 114.56, w/ a 7.34 1/8 @ 93.50, and a 1.622 60'
89 RS, L03 305, Hypertech Chip,cat delete, Dynomax exhaust,K&N open element Filter,160 stat, MSD coil --Trans:700R4 Corvette Servo -- Rearend: 7.5 GM 3.42 w/ posi-lock
Bassett Racing
[This message has been edited by Basett_Racing (edited August 28, 2001).]
------------------
82 Z28 383, Ported 215cc Dart Iron Eagle Heads 72 cc Comb. Chambers, Comp custom grind Hyd roller cam, Speed Pro .250" domes, Wheeler Motorsports 4340 I beam rods, Eagle 5140 steel crank, Weiand Team G intake, Holley 830 DP, hedman headers
Trans: Turbo 350 w/ 4000 stall -- Rearend 7.5 w/ Richmond 4.10's, Auburn Minispool
Best ET:11.60 @ 114.56, w/ a 7.34 1/8 @ 93.50, and a 1.622 60'
89 RS, L03 305, Hypertech Chip,cat delete, Dynomax exhaust,K&N open element Filter,160 stat, MSD coil --Trans:700R4 Corvette Servo -- Rearend: 7.5 GM 3.42 w/ posi-lock
Bassett Racing
[This message has been edited by Basett_Racing (edited August 28, 2001).]
#18
Junior Member
Join Date: Aug 2001
Location: Enfield CT
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
ok, id like to keep everything as is, so keep all the cutouts and odometer spaces and the numbers black and id also like to keep the warning lines. thanks so much...oh and i also have a question...I wanna change the color of the lights but i was wondering what is the best place to get the blue xenon lights from and how many i should get if i am gonna be doin my whole dash blue? (directionals, warning lights, etc.)
#19
Senior Member
Join Date: Jul 2001
Location: Valley Head, AL
Posts: 839
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Camaro "SC-350"
Engine: Mild 350 4-bolt
Transmission: 700R4 w/ TCI Stall
Im in northeast Alabama, about 15 miles north of Fort Payne? By the way could you email me that template of the speedo. But could you make it Black like original, all the same style numbers/letters but make the orange ones blue? Thanks.
------------------
1983 Camaro Sport Coupe
Charcoal exterior/light sand gray interior, Console clock, Power hatch release, Gauge option, Spoiler, and no darn rpo or build sheets!
No Motor or tranny......yet!
1964 Impala Super Sport,
327/Powerglide, Daytona Blue Metallic/Blue interior
------------------
1983 Camaro Sport Coupe
Charcoal exterior/light sand gray interior, Console clock, Power hatch release, Gauge option, Spoiler, and no darn rpo or build sheets!
No Motor or tranny......yet!
1964 Impala Super Sport,
327/Powerglide, Daytona Blue Metallic/Blue interior
#20
I will try to get a picture today of my dash
------------------
Nobody ever got cancer from smoking tires!
If you aren't living on the edge, you're just taking up space
gibsandwich@hotmail.com
www.icq.com : #18562788
----------------------------
1982 Z28 Camaro
305 Carburated
Muncie 4-speed
2.5" Stainless steel exhaust all the way through
Fibreglass hood
Boston 4x6" CX7e 2-ways
6x9" Nippon America (no-name?) 3-ways
Other stuff I haven't figured out yet.
------------------
Nobody ever got cancer from smoking tires!
If you aren't living on the edge, you're just taking up space
gibsandwich@hotmail.com
www.icq.com : #18562788
----------------------------
1982 Z28 Camaro
305 Carburated
Muncie 4-speed
2.5" Stainless steel exhaust all the way through
Fibreglass hood
Boston 4x6" CX7e 2-ways
6x9" Nippon America (no-name?) 3-ways
Other stuff I haven't figured out yet.
#21
test
------------------
Nobody ever got cancer from smoking tires!
gibsandwich@hotmail.com
www.icq.com : #18562788
----------------------------
1982 Z28 Camaro
305 Carburated
Muncie 4-speed
2.5" Stainless steel exhaust all the way through
Fibreglass hood
Boston 4x6" CX7e 2-ways
6x9" Nippon America (no-name?) 3-ways
Other stuff I haven't figured out yet.
[This message has been edited by Gib_Sandwich (edited August 30, 2001).]
------------------
Nobody ever got cancer from smoking tires!
gibsandwich@hotmail.com
www.icq.com : #18562788
----------------------------
1982 Z28 Camaro
305 Carburated
Muncie 4-speed
2.5" Stainless steel exhaust all the way through
Fibreglass hood
Boston 4x6" CX7e 2-ways
6x9" Nippon America (no-name?) 3-ways
Other stuff I haven't figured out yet.
[This message has been edited by Gib_Sandwich (edited August 30, 2001).]
#22
Damn does anyone have a good site or something where I can put pictures?
I was about to post some pictures of my gauge cluster but now all of a sudden it is screwed, all my sig pics and everything is screwed....can anyone help please
------------------
Nobody ever got cancer from smoking tires!
gibsandwich@hotmail.com
www.icq.com : #18562788
----------------------------
1982 Z28 Camaro
305 Carburated
Muncie 4-speed
2.5" Stainless steel exhaust all the way through
Fibreglass hood
Boston 4x6" CX7e 2-ways
6x9" Nippon America (no-name?) 3-ways
Other stuff I haven't figured out yet.
I was about to post some pictures of my gauge cluster but now all of a sudden it is screwed, all my sig pics and everything is screwed....can anyone help please
------------------
Nobody ever got cancer from smoking tires!
gibsandwich@hotmail.com
www.icq.com : #18562788
----------------------------
1982 Z28 Camaro
305 Carburated
Muncie 4-speed
2.5" Stainless steel exhaust all the way through
Fibreglass hood
Boston 4x6" CX7e 2-ways
6x9" Nippon America (no-name?) 3-ways
Other stuff I haven't figured out yet.
#23
Supreme Member
Join Date: Aug 1999
Location: Mililani, HI USofA Search Posts: 2848.............. Whore Posts: 47.................. Magical Whore Posts: 1
Posts: 3,534
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro 77K
Engine: 3.1 Vslick
#25
Ok cool it worked but I had to right click on that to get the url for them....are they going to change often?
Because I want to use this for my signature pictures....
Here's something I just knocked up
[This message has been edited by Gib_Sandwich (edited August 30, 2001).]
Because I want to use this for my signature pictures....
Here's something I just knocked up
[This message has been edited by Gib_Sandwich (edited August 30, 2001).]
#26
I dunno I like mine better... this is for the v6's.
<img src= "http://www.nconnect.net/~briones/whitetachv6.jpg">
my speedo looks similar except the tripometer is deleted, and the KPH is deleted. It's not a 115 mph speedo though, it's the 145 one. have a 145 mph speedo, and it has a bowtie and the "official" C A M A R O nameplate on it. where the tripometer was. and when you turn on the brights, a Blue bowtie lights up instead of the hi-beam thing.
------------------
Dan Briones
1988 Camaro Sport Coupe
2.8 V6, TCI 3200 Stall TC, B&M Transkit, Flowmaster & Catback (No Cat)
CFI Z/28 Hood, '87 16" IROC Wheels, Bowtie Grille, IROC Gauges, IROC Taillights,
IROC Foglamps w/ 9005 hi-beam bulbs
Heritage Style Hood and Decklid Stripes
<img src= "http://www.nconnect.net/~briones/whitetachv6.jpg">
my speedo looks similar except the tripometer is deleted, and the KPH is deleted. It's not a 115 mph speedo though, it's the 145 one. have a 145 mph speedo, and it has a bowtie and the "official" C A M A R O nameplate on it. where the tripometer was. and when you turn on the brights, a Blue bowtie lights up instead of the hi-beam thing.
------------------
Dan Briones
1988 Camaro Sport Coupe
2.8 V6, TCI 3200 Stall TC, B&M Transkit, Flowmaster & Catback (No Cat)
CFI Z/28 Hood, '87 16" IROC Wheels, Bowtie Grille, IROC Gauges, IROC Taillights,
IROC Foglamps w/ 9005 hi-beam bulbs
Heritage Style Hood and Decklid Stripes
Thread
Thread Starter
Forum
Replies
Last Post
gta892000
Cooling
6
09-16-2015 12:37 AM