Auto Meter guages into camaro?
#1
Junior Member
Thread Starter
Join Date: Jan 2001
Location: Palmer, Alaska
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Auto Meter guages into camaro?
Hi all,
I have a 1984 Z28 with the stupid 85 mph speedo and was wondering if it was possible to put the auto meter tach and speedo into the camaro. What size guages are they? They are offered in 3 3/4 and 5 inches i think.
Thanks for your help
Ryan
I have a 1984 Z28 with the stupid 85 mph speedo and was wondering if it was possible to put the auto meter tach and speedo into the camaro. What size guages are they? They are offered in 3 3/4 and 5 inches i think.
Thanks for your help
Ryan
#2
Junior Member
Join Date: Apr 2001
Location: Newtown, CT
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
You can put an autometer Speedo in there but I think you can only use the 3.25 inch one. I have the speedo, tach and 4 gauges in my 82 firebird. I had to make a gague panel out of plexi glass and I had to get a new speedometer cable because the stock one won't fit the fitting on the back of the Autometer. I cut the old panel to fit the new panel an d painted it black on the bakc side so it looks real sharp. ANy questions then email me.
Dan
Dan
#3
Junior Member
Join Date: Apr 2001
Location: Newtown, CT
Posts: 87
Likes: 0
Received 0 Likes
on
0 Posts
You can put an autometer Speedo in there but I think you can only use the 3.25 inch one. I have the speedo, tach and 4 gauges in my 82 firebird. I had to make a gague panel out of plexi glass and I had to get a new speedometer cable because the stock one won't fit the fitting on the back of the Autometer. I cut the old panel to fit the new panel an d painted it black on the bakc side so it looks real sharp. ANy questions then email me.
Dan
Dan
#4
Yes its possible to put Autometer gauges in your car. I have a 84 Camaro and I replaced all of the factroy gauges with Autometer Ultra-Lite gauges. The aftermarket gauges won't fit in the factory panel so you will have to fabricate a new panel and run some additional wires for the new gauges. If you have any questions send me an email at jbenge@hotmail.com
heres a picture of my gauges
------------------
best 1/4 mile so far: 13.4 @ 101mph
84 Camaro 305 ported & milled heads, 3 angle valve job, Edelbrock Performer RPM intake, Hedman full length headers, Accell ignition, Crane 274H cam, B&M 700R-4, 3000 stall speed, 4.10 gear,
M/T ET street tires
visit my website at http://www.geocities.com/jbenge/page1.html
heres a picture of my gauges
------------------
best 1/4 mile so far: 13.4 @ 101mph
84 Camaro 305 ported & milled heads, 3 angle valve job, Edelbrock Performer RPM intake, Hedman full length headers, Accell ignition, Crane 274H cam, B&M 700R-4, 3000 stall speed, 4.10 gear,
M/T ET street tires
visit my website at http://www.geocities.com/jbenge/page1.html
#5
Member
Join Date: Feb 2000
Location: Bloomfield Hills, Mi
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
I installed all Phantom Gauges into my 86 IROC. I had a hard time finding someone to sell me the ABS plastic to make a new dash plate and I also made an add on gauge panel for the remainder of the gauges I wanted to install. It gets expensive doing this, but I think it is well worth it.
------------------
1986 IROC
New Crate 350 w/Vortec Heads, Edelbrock 2116 Vortec Manifold, Edelbrock Performer 2102 Cam, Edelbrock 1406 carb, Hedman shorty headers, Flowmaster Catback, Rebuilt 700r4 w/vette servo, etc..
[This message has been edited by valu8or (edited April 12, 2001).]
[This message has been edited by valu8or (edited April 12, 2001).]
------------------
1986 IROC
New Crate 350 w/Vortec Heads, Edelbrock 2116 Vortec Manifold, Edelbrock Performer 2102 Cam, Edelbrock 1406 carb, Hedman shorty headers, Flowmaster Catback, Rebuilt 700r4 w/vette servo, etc..
[This message has been edited by valu8or (edited April 12, 2001).]
[This message has been edited by valu8or (edited April 12, 2001).]
#6
For all you guys who installed autometer's in your car.... what did you do with all the electronic stuffs. Isn't there some kind of sensor that the cpu needs from that cluster?
I want to install Phantom's as well but was too confused about the electronics.
------------------
89CamaroRS
Power Rating: 1.21 Jigowatts
Mods:Flux Capacitor
Future Plans: Time Travel
I want to install Phantom's as well but was too confused about the electronics.
------------------
89CamaroRS
Power Rating: 1.21 Jigowatts
Mods:Flux Capacitor
Future Plans: Time Travel
#7
props to both of the guys with the autometers in their camaros. It looks good. Good job
------------------
91 Formula 1LE 1 of 46
305 TPI 5speed
1LE/G92/WS6
Paxton SN92 supercharger, Ford SVO 24#injectors, Crane AFPR,SLP airfoil, ported/polished plenum, March alt. pulley,Crane Gold 1.6rrs,MSD coil,MSD6AL (5400rpm limit),Holley 9mm wires,Ac delco R43ts plugs,custom chip,Bosch O2sensor,SLP 1 5/8" headers,SLP catback,shortened shifter,3:73s w/Auburn posi,180* t-stat,JET 195* fan switch, Macewen white face gauges, Autometer gauges, Zoom hi-performance clutch.
------------------
91 Formula 1LE 1 of 46
305 TPI 5speed
1LE/G92/WS6
Paxton SN92 supercharger, Ford SVO 24#injectors, Crane AFPR,SLP airfoil, ported/polished plenum, March alt. pulley,Crane Gold 1.6rrs,MSD coil,MSD6AL (5400rpm limit),Holley 9mm wires,Ac delco R43ts plugs,custom chip,Bosch O2sensor,SLP 1 5/8" headers,SLP catback,shortened shifter,3:73s w/Auburn posi,180* t-stat,JET 195* fan switch, Macewen white face gauges, Autometer gauges, Zoom hi-performance clutch.
Trending Topics
#10
My car doesn't have a computer anymore so I don't know if there is any issues about vehicle speed sensors. My car is an 84 so I don't think it had anything like that anyway but it may be different for those of you who have newer fuel injected thirdgens.
------------------
best 1/4 mile so far: 13.4 @ 101mph
84 Camaro 305 ported & milled heads, 3 angle valve job, Edelbrock Performer RPM intake, Hedman full length headers, Accell ignition, Crane 274H cam, B&M 700R-4, 3000 stall speed, 4.10 gear,
M/T ET street tires
visit my website at http://www.geocities.com/jbenge/page1.html
------------------
best 1/4 mile so far: 13.4 @ 101mph
84 Camaro 305 ported & milled heads, 3 angle valve job, Edelbrock Performer RPM intake, Hedman full length headers, Accell ignition, Crane 274H cam, B&M 700R-4, 3000 stall speed, 4.10 gear,
M/T ET street tires
visit my website at http://www.geocities.com/jbenge/page1.html
#11
Senior Member
Join Date: Feb 2001
Location: PORT RICHEY, FLORIDA
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983 Camaro Sport Coupe
Engine: 1986 305 C.I.D. Bored .030 over
Transmission: TH350 W/Shift Kit
Axle/Gears: 3:08
those phantom gauges look sweeeeeeeeeeeeet
#13
I also like the stock look but after seeing those setups I am a changed man. I wish I knew how to do that stuff. Mad props to you guys, great job! Now you've got me thinking about how much I want to spend on new gauges.
------------------
Jay
black 85 Z28, t-tops, 4bbl carb, flowmaster 80 series muffler w/ custom tips (hollowed out cat), edelbrock chrome air cleaner, Infinity 4" 2 way front speakers and Infinity 3 way 6x9s, Alpine CDA-7863 head unit. many more mods planned (holley carb 4160 and edelbrock performer intake coming very soon)
Jay's webpage
------------------
Jay
black 85 Z28, t-tops, 4bbl carb, flowmaster 80 series muffler w/ custom tips (hollowed out cat), edelbrock chrome air cleaner, Infinity 4" 2 way front speakers and Infinity 3 way 6x9s, Alpine CDA-7863 head unit. many more mods planned (holley carb 4160 and edelbrock performer intake coming very soon)
Jay's webpage
#15
FBODY-ADDICT, The gauges in the pod are just regular autometer gauges, the pod doesn't require special gauges. I bought the pod from autometer and it comes with all the stuff to mount the guages on the pod.
------------------
best 1/4 mile so far: 13.4 @ 101mph
84 Camaro 305 ported & milled heads, 3 angle valve job, Edelbrock Performer RPM intake, Hedman full length headers, Accell ignition, Crane 274H cam, B&M 700R-4, 3000 stall speed, 4.10 gear,
M/T ET street tires
visit my website at http://www.geocities.com/jbenge/page1.html
------------------
best 1/4 mile so far: 13.4 @ 101mph
84 Camaro 305 ported & milled heads, 3 angle valve job, Edelbrock Performer RPM intake, Hedman full length headers, Accell ignition, Crane 274H cam, B&M 700R-4, 3000 stall speed, 4.10 gear,
M/T ET street tires
visit my website at http://www.geocities.com/jbenge/page1.html
#16
Senior Member
hey valu8or, where did you find the ABS plastic? also is your car carbed or FI? Because i notice the air/fuel ratio gauge on your dash and I couldnt get mine to work e/ the carb. I just connected the gauge wire right to the O2 and it got no reading
------------------
350, Comp 262, Edelbrock Performer intake 600 cfm carb and exhaust, headers
-JVC, Eclipse, Pioneer, MTX, Phoenix Gold, Planet Audio
------------------
350, Comp 262, Edelbrock Performer intake 600 cfm carb and exhaust, headers
-JVC, Eclipse, Pioneer, MTX, Phoenix Gold, Planet Audio
#17
Member
Join Date: Feb 2000
Location: Bloomfield Hills, Mi
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
I finally found a sales man at a local plastic company who wasn't an A$$. I bought a 4x8 sheet of .19 ABS for $25.00. I made about 10 different models (out of wood) for the dash using the old one as starting point. It only took two times to make the plastic one. I also fabricated a plastic portion for under the dash vents and above the radio for the rest of the gauges. I am still working on the final one for that though. I will attach the photo for that at the end of this message. As for the o2 sensor, I had to purchase the Autometer one. I took all of the computer crap off the motor when I built it and had the o2 bung welded to the header cross pipe. I do not know it the stock one would have worked because all of that stuff was thrown away when I tore it out. I also have a switch below the speedometer to turn off the o2 gauge if I do not want it to annoy me. The gauges in the aux panel are water temp, trans temp, oil temp, volts and oil pressure. It was the only way I could fit the gauges I wanted without using the pillar pod. I do have aa Autometer 2 gauge pillar pod which I did not use if anyone is interested in buying it. Let me know. Maybe after I get everything done perfectly I will post more photos and maybe write a tech article. It won't be for a while though, I am slammed with work right now.
[This message has been edited by valu8or (edited April 20, 2001).]
[This message has been edited by valu8or (edited April 20, 2001).]
#21
Member
Join Date: Dec 2000
Location: Downers Grove, IL
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
im keeping the stock gauge cluster, but im gettting the autometer guage pillar (in the mail now from summit) so they dont clash im gettign z-series ones and putting th red light overlays on them. btw the guages are an air/feul mixture one and a vacume/boost one ill post some pics when its done
------------------
89' Firebird Formula WS6 L98,AFPR, MSD 6AL, MSD Blaster, Hypertech chip, K/N filter cone(no air cleaner box),flowmaster 80 series, hypertech air foil, modified MAF, ported plemum, koni shocks, edelbrock trailing arms,subfame conectors, March Pulleys, Jet fan switch,Throttle body bypass, BFG drag radials, Edelbrock strut tower brace, 3.27 posi rear, B&M deep tranny pan, B&M Shift kit...
------------------
89' Firebird Formula WS6 L98,AFPR, MSD 6AL, MSD Blaster, Hypertech chip, K/N filter cone(no air cleaner box),flowmaster 80 series, hypertech air foil, modified MAF, ported plemum, koni shocks, edelbrock trailing arms,subfame conectors, March Pulleys, Jet fan switch,Throttle body bypass, BFG drag radials, Edelbrock strut tower brace, 3.27 posi rear, B&M deep tranny pan, B&M Shift kit...
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
08-20-2017 12:16 AM
db057
TBI
10
08-11-2015 10:11 PM