Thinking on doing a K.I.T.T replica
#52
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
Yes that would kill my whole new dk gray and black look pretty bad, but are the visor off a T Top bird. I can still dye them
#56
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
Hey sfusc03, Ive been in meetings, trainings etc these past 2 days. No time for nothing, but did get to go yesterday to the Chicago Auto Show. Got some pics of Bubblebee camaro and talked to a Pontiac rep and asked about the TA Concept and they said no answers on that yet. I was looking forward of see this ride but nothing. So Im back today and tomorrow so whats new.
#57
Member
iTrader: (1)
Join Date: Apr 2006
Location: NJ
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 firebird, 89 trans am GTA
Re: Thinking on doing a K.I.T.T replica
Nothing else is new I took your advice and had a few beers and I'm felling better. I'm going to get the quote for you today. I read an article the other day about the new t/a and that gm is scaling back on there vehicle lines so no t/a in the near future. http://www.autonews.com/apps/pbcs.dl...802120311/1203
#58
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
That really sucks. The new Pontiac Seems to only designs cars for women mostly. The GTO isnt even being done either. I didnt see it at the show yesterday. All of these G6,7,8,etc cars really suck. Man where is Pontiac going. Its sad.
#60
Re: Thinking on doing a K.I.T.T replica
Good luck with your kitt! Check ebay out too for kitt stuff.
Knight rider is a mustang now..... http://www.myspace.com/nbcknightrider
Knight rider is a mustang now..... http://www.myspace.com/nbcknightrider
#61
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
How do you want me to pay. If you have a Paypal Account I can pay you that way. OR a M.O
#63
Supreme Member
Re: Thinking on doing a K.I.T.T replica
i have sene new trans am fenders for 99 bucks somewhere online and i know you can get a bumper nose for 100 or 150 used maybe less if you hit the right person or place at the right time
car-part.com search local yards
call them all up for an 82 83 84 t/a bumper
my stock factory appearance 82 t/a is getting more and more rare yay D
car-part.com search local yards
call them all up for an 82 83 84 t/a bumper
my stock factory appearance 82 t/a is getting more and more rare yay D
#64
Supreme Member
Join Date: Jun 2002
Location: ATX
Posts: 1,571
Likes: 0
Received 0 Likes
on
0 Posts
Car: Kitt
Engine: Classified
Transmission: T56
Axle/Gears: Moser/4:11
Re: Thinking on doing a K.I.T.T replica
I'm doing a Kitt replica of my own too, although mine won't be the traditional version.
#65
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
Speaking of KITT, did anyone see yesterdays 1st Knight Rider.
KITT in pieces at the beginning of the show. That was hard to watch. '
Then the Lady cop comes out of the bathroom and tells the hot blonde on her bed that she's going to work and that she can stay as long as she wants. Im looking at that and think Knight Rider series with a love affair but not with micheal in it but 2 girls. If Im wrong please tell me but a lesbian relationship on Knight rider. WOW.
KITT in pieces at the beginning of the show. That was hard to watch. '
Then the Lady cop comes out of the bathroom and tells the hot blonde on her bed that she's going to work and that she can stay as long as she wants. Im looking at that and think Knight Rider series with a love affair but not with micheal in it but 2 girls. If Im wrong please tell me but a lesbian relationship on Knight rider. WOW.
#67
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
SO their 3 firebirds or what. Its monday morning and Im still trying to get going this morning. I got your email and Im paying today. So help me out with the 2 pics.
Last edited by JRods Firebird; 02-18-2008 at 11:29 AM.
#68
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
Forgot to tell you. Yesterday had some time to work on the Firebird. I had to patch some holes on the floor boards. I removed the car cover off of it and the dam cover rubbed into the clear coat throught out the car. I was pissed. I try some 3m compond on it and and didnt work. Now for sure Im going to have to paint the car now. It looks bad. I also think I got a exhaust leak somewhere because it sounds louder then before.
#69
Member
iTrader: (1)
Join Date: Apr 2006
Location: NJ
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 firebird, 89 trans am GTA
Re: Thinking on doing a K.I.T.T replica
well we know that one is kitt (knight industries two thousand), the others could be either KARR (knight automated roving robot), and kift (knight industries four thousand) from the knight rider 2000 movie. or there could be the 1/2nd season kitt and 3/4th season kitt there.
#70
Supreme Member
Join Date: Jun 2002
Location: ATX
Posts: 1,571
Likes: 0
Received 0 Likes
on
0 Posts
Car: Kitt
Engine: Classified
Transmission: T56
Axle/Gears: Moser/4:11
Re: Thinking on doing a K.I.T.T replica
well we know that one is kitt (knight industries two thousand), the others could be either KARR (knight automated roving robot), and kift (knight industries four thousand) from the knight rider 2000 movie. or there could be the 1/2nd season kitt and 3/4th season kitt there.
#71
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
Sent payment. Thank alot Talk to you tomorrow, Leaving work now
#72
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
I got the stuff in today, but at work and will wait to open when I get home. thanks alot for everything. I think I might have found a Formule Hood, Wheels and covers and Bumper, but the guy is telling me the bumper wont fit a 91. Its off a 84 Trans am. Is that true or it should work.
#73
Member
iTrader: (1)
Join Date: Apr 2006
Location: NJ
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 firebird, 89 trans am GTA
Re: Thinking on doing a K.I.T.T replica
If your talking about the rear bumper then no it won't fit that is why you have to cut it down that is what I referred to several posts ago.
#74
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
Hey sfusco3, Whats up, been working so much havent had time to do anything. Whats up with you.
#75
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
Hey sfusco3, I got bad news, but still have a bit of good news.
#77
Senior Member
Join Date: Oct 2007
Location: Stone Mtn., GA
Posts: 585
Likes: 0
Received 0 Likes
on
0 Posts
Car: 90 Camaro RS
Engine: V6 3.1 MFI
Transmission: 4 Speed Auto 700R4
Axle/Gears: 3.23
Re: Thinking on doing a K.I.T.T replica
Speaking of KITT, did anyone see yesterdays 1st Knight Rider.
KITT in pieces at the beginning of the show. That was hard to watch. '
Then the Lady cop comes out of the bathroom and tells the hot blonde on her bed that she's going to work and that she can stay as long as she wants. Im looking at that and think Knight Rider series with a love affair but not with micheal in it but 2 girls. If Im wrong please tell me but a lesbian relationship on Knight rider. WOW.
KITT in pieces at the beginning of the show. That was hard to watch. '
Then the Lady cop comes out of the bathroom and tells the hot blonde on her bed that she's going to work and that she can stay as long as she wants. Im looking at that and think Knight Rider series with a love affair but not with micheal in it but 2 girls. If Im wrong please tell me but a lesbian relationship on Knight rider. WOW.
#78
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
Well my $1500 budget to get my bird exterior to look like kitts has been reduced to $650, Reason I spoke to my buddy thats been installing a engine, tranny and posi rear end in my 68 Charger. That his total for extras including a new drive shaft and my dash is going to need a restro on it to due to none of the gauges are working. I did test them and got voltage readings and were good and double checked fuses and connections and still not work, so for both those units to be fixed or replaced was an extra $850 on top of what I already owe him which is several grand. I can try to make it up but my mom has also been in the hospital 3 times in Jan 08 and the bills are getting out of control so extra dole that I make is trying to help her with those bills. So I have $650, that car is still going to be painted black and Im going to buy a 82 through 84 Trans am nose and rig it to install the light. Also I got a guy saying he should be able to get me the turbo cast wheels for $200. It sucks man, but I love my mom I have to help her but GOOD news Im still going ahead to get my bird in looking like K.I.T.T so not everything is a total loss.
----------
Also will 82-87 trans am rear dark lights fit into our 91 bird. Im looking at some of those also. I cant see a reason why but would I have to rig the wires also.
----------
Also will 82-87 trans am rear dark lights fit into our 91 bird. Im looking at some of those also. I cant see a reason why but would I have to rig the wires also.
Last edited by JRods Firebird; 02-25-2008 at 11:03 AM. Reason: Automerged Doublepost
#79
Member
iTrader: (1)
Join Date: Apr 2006
Location: NJ
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 firebird, 89 trans am GTA
Re: Thinking on doing a K.I.T.T replica
They will fit but out taillights have a separate bulb for turn and brake then transams have theres as a combo light and you just can't combine the wires cause then when you try to use the turn and are on the brake the light won't flash. What I did was I used a hd trailer tailight converter and wires them that way. If you want give me a phone call my # is 2012228690
#80
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
well got hit with another dam snow storm. Bird is cover completely. Finshed patch job. . going to try to install the new carpet today but with a temp of 13degrees Im not going to be out that long I can tell.
#84
Member
iTrader: (1)
Join Date: Apr 2006
Location: NJ
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 firebird, 89 trans am GTA
Re: Thinking on doing a K.I.T.T replica
they went out dhl this morning
----------
here is a link to some blackouts for the 91 bird
http://www.hawksthirdgenparts.com/in...ROD&ProdID=420
----------
here is a link to some blackouts for the 91 bird
http://www.hawksthirdgenparts.com/in...ROD&ProdID=420
Last edited by sfusco3; 02-29-2008 at 11:35 AM. Reason: Automerged Doublepost
#85
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
Got your message
----------
Man those covers cost almost $30 more then the 4thgen firebirds.
----------
Man those covers cost almost $30 more then the 4thgen firebirds.
Last edited by JRods Firebird; 02-29-2008 at 11:38 AM. Reason: Automerged Doublepost
#86
Banned
Join Date: Nov 2004
Location: cleveland ohio
Posts: 740
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 camaro RS
Engine: CharlesOdoryOB
Transmission: 82513892892
Axle/Gears: pbr disc 3.27 nine bolt
Re: Thinking on doing a K.I.T.T replica
you better watch out ive got a 92 firebird here that my girlfreind wanted to convert to kitt i had got all the needed parts but the bar that holds on the rocker ground effects is welded on not bolted so we sold off the kitt parts other then the formula hood and i just put a gta bumpers on
not to mention haveing to fill in all the holes
go find a 87-92 formula it will make your job so much easier or a base firebird with no ground effects just the formulas already have the hood ive also seen mods to the 91-92 formula front bumpers that add the scanner gave it a much more modern and sleek style
not to mention haveing to fill in all the holes
go find a 87-92 formula it will make your job so much easier or a base firebird with no ground effects just the formulas already have the hood ive also seen mods to the 91-92 formula front bumpers that add the scanner gave it a much more modern and sleek style
#88
Banned
Join Date: Nov 2004
Location: cleveland ohio
Posts: 740
Likes: 0
Received 1 Like
on
1 Post
Car: 1991 camaro RS
Engine: CharlesOdoryOB
Transmission: 82513892892
Axle/Gears: pbr disc 3.27 nine bolt
Re: Thinking on doing a K.I.T.T replica
at the time i felt i wasnt worth doing the bondo work
300 for the car 70 for a formula front clip 30 for the formula hood .
then it was 560 for the kitt bumper not including any scanner parts im glad she changed her mind sold the one kitt bumper .
was able got a full GTA ground effects package with both bumpers and tail lights for 350 she is still getting it painted black
300 for the car 70 for a formula front clip 30 for the formula hood .
then it was 560 for the kitt bumper not including any scanner parts im glad she changed her mind sold the one kitt bumper .
was able got a full GTA ground effects package with both bumpers and tail lights for 350 she is still getting it painted black
#89
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
you better watch out ive got a 92 firebird here that my girlfreind wanted to convert to kitt i had got all the needed parts but the bar that holds on the rocker ground effects is welded on not bolted so we sold off the kitt parts other then the formula hood and i just put a gta bumpers on
not to mention haveing to fill in all the holes
go find a 87-92 formula it will make your job so much easier or a base firebird with no ground effects just the formulas already have the hood ive also seen mods to the 91-92 formula front bumpers that add the scanner gave it a much more modern and sleek style
not to mention haveing to fill in all the holes
go find a 87-92 formula it will make your job so much easier or a base firebird with no ground effects just the formulas already have the hood ive also seen mods to the 91-92 formula front bumpers that add the scanner gave it a much more modern and sleek style
mine are riveted on and I got smaller GFX from sfusco3 to cover up most of the holes and will look for 82-84 trans am nose and retrofit it and should be to much of a problem. Once weather breaks Im going to look for a Formula Hood and trans am bumper and that should be it. Also the car needs a full paint job due to the dam car cover rubbed the clear coat off through out the car.
#90
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
Steve, my work computer is acting stupid. Did you get my email. Those's links dont work.
#91
Member
iTrader: (1)
Join Date: Apr 2006
Location: NJ
Posts: 114
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 firebird, 89 trans am GTA
Re: Thinking on doing a K.I.T.T replica
Sorry but you have to put the tracking #'s in they are the one that are highlighted. I have never had a wheel bearing issue. They one I have now are not the same ones I had on the gta rims cause I went to the 14's rims first then the 15's I have now. The stock tire size in 91 firebirds was 235/60-15 and the stock for trans ams was 215/65-15. I have the 215/65's on mine. but you can go plus or minus 5%
#92
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
Steve I got all 4 wheels and they are going to look great after painting them gloss black. Thanks man. To cold to do anything major to the car right now so will call if I got any questions.
#93
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
Just a quick update. Ive been working 6 day wks for the past 2 month so trying to finsh the interior and Im 95% done and will try to start on the body tomorrow if possible and will try to take some pics but someone in the family dropped my digital camera and its not working correctly now. So might buy a new one. Got a 88 Formula hood last wk in black and in great shape for $30 bucks.
#94
Member
iTrader: (2)
Join Date: Jun 2006
Location: Chattanooga, Tn
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Formula
Engine: BluePrint 355 w/ 600cfm Carb
Transmission: 700R4
Axle/Gears: New axles, Yukon 3.73 & Eaton Posi
Re: Thinking on doing a K.I.T.T replica
I have a 90 hardtop Formula I put a lot of time and money into just like you, I wanted t-tops though. So after a few months of thinking of all the options and costs I decided to buy an older (87) carbureted Formula with t-tops. The engine was ok but had high miles (60k more than the 90), and the body needed little work and the interior was completely shot. I knew that the 90 had perfect interior except the carpet. So I bought the 87 for 850 bucks and did a swap. I am almost finished. The engine and all suspension came out of the 90 into the 87. Interior from the 90 into the 87 with new carpet.
So, you love your car right? You value the time and money you already put into it? Swap it. Find something older and swap it.
Besides since I swapped to an older car that was originally carbureted I got to take off the smog junk, throw on headers and replace the intake and carb with Edelbrock parts. Now the 87 is faster than it was before and faster than the 90 was.
So, you love your car right? You value the time and money you already put into it? Swap it. Find something older and swap it.
Besides since I swapped to an older car that was originally carbureted I got to take off the smog junk, throw on headers and replace the intake and carb with Edelbrock parts. Now the 87 is faster than it was before and faster than the 90 was.
#95
Member
Thread Starter
Join Date: Oct 2007
Location: Hobart, Indiana
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
Car: Different Rides but 1991 Firebird
Engine: V6 3.1 in Bird
Re: Thinking on doing a K.I.T.T replica
Dam Speedy, you really wanted T Tops. Great job man. I dont think I would do that, but If I cam upon a Trams am with all the goodies in it that was wrecked. I just might yank that engine tranny and other good stuff and Put it into my bird now. Well the interior is done. Finshed up the last panels yesterday and did a deep cleaning thing and then some armor all and man it looks awesome. Well the body is next but I might need surgery on my left elbow so will know by end of next wk. Hope not then that going to mess all of my future projects.
#96
Member
iTrader: (2)
Join Date: Jun 2006
Location: Chattanooga, Tn
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Formula
Engine: BluePrint 355 w/ 600cfm Carb
Transmission: 700R4
Axle/Gears: New axles, Yukon 3.73 & Eaton Posi
Re: Thinking on doing a K.I.T.T replica
Actually, the car was 850, the guy delivered it from Richmond Va to Chattanooga Tn for me for an extra 250. So, 1100. The tranny had just been rebuilt with an aggressive shift kit only 1k miles before I bought it. The transmission made a huge improvement on performance. So the way I saw it, I paid 1k for a rebuilt tranny, that's what it typically costs to rebuild the 700R4 anyway, and it came with a free car for me to put my engine and interior in :-)
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM