Offical Non-BS Aftermarket Tail Light Thread
#1
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Albany, NY Area
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Car: Red on Red 89 RS
Engine: LO3 305 TBI
Transmission: TH-700R4
Axle/Gears: 10-bolt / 2.73
Offical Non-BS Aftermarket Tail Light Thread
OK guys, I have those hideous '89 RS tails, which will soon be swapped for Z-28 Grid style lights.
I'm sure that most camaro owners here do not like the way their stock tail lights look.
I recall seeing a set of 'vette lights on a 91/2 camaro, but his car was too fast for me to catch up to him and ask where he got them.
Post any aftermarket tail lights that you can find in this thread, and maybe it'll become a sticky for everyone to reference.
-Jim
I'm sure that most camaro owners here do not like the way their stock tail lights look.
I recall seeing a set of 'vette lights on a 91/2 camaro, but his car was too fast for me to catch up to him and ask where he got them.
Post any aftermarket tail lights that you can find in this thread, and maybe it'll become a sticky for everyone to reference.
-Jim
#2
Supreme Member
iTrader: (2)
Join Date: Oct 1999
Location: Minnesota
Posts: 1,794
Likes: 0
Received 16 Likes
on
10 Posts
Car: 1990 Formula
Engine: 350 TPI
Transmission: Auto
Axle/Gears: 3:73 Posi
Here's a pic I found on the Internet a while ago. I know there is a company that makes this kit, I just don't know who it is.
#3
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Albany, NY Area
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Car: Red on Red 89 RS
Engine: LO3 305 TBI
Transmission: TH-700R4
Axle/Gears: 10-bolt / 2.73
That's what I saw!
I want to get that kit, and install smaller round lights twords the middle for reverse lights.
Anyone know who makes these kits?!
I want to get that kit, and install smaller round lights twords the middle for reverse lights.
Anyone know who makes these kits?!
#5
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Albany, NY Area
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Car: Red on Red 89 RS
Engine: LO3 305 TBI
Transmission: TH-700R4
Axle/Gears: 10-bolt / 2.73
Originally posted by stonedchihuahua
This looks very ugly and wrong. If you want vette lights, please buy a vette.
This looks very ugly and wrong. If you want vette lights, please buy a vette.
#6
Senior Member
iTrader: (1)
Join Date: Feb 2005
Location: Bonham TX
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 & 89 Iroc's
Engine: 5.0 - 5.7
Transmission: 700R's
Axle/Gears: 2.77 - 3.70
I too would like this kit and this has been brought up many times.
The manufacturer is no longer in the car parts biz.
The manufacturer is no longer in the car parts biz.
#7
Member
Join Date: Mar 2003
Location: Alberta
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 camaro
Originally posted by jimp2001
keep your opinion to yourself, this thread was made to help locate aftermarket tail lights, not to bash them.
keep your opinion to yourself, this thread was made to help locate aftermarket tail lights, not to bash them.
Okay well how about this.... those tail lights appear to be illegal, since it cuts out the triangle section of the tail light that is the equivellent of a side marker light.
Keep this in mind if you want to buy them. Check the laws in your area.
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Albany, NY Area
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Car: Red on Red 89 RS
Engine: LO3 305 TBI
Transmission: TH-700R4
Axle/Gears: 10-bolt / 2.73
all this thread is supposed to be is a list of aftermarket tail lights, it's been her efor less than 24 hours and its already cluttered with crap...
#9
Member
Join Date: Mar 2003
Location: Alberta
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 camaro
ok then how about this
http://www.bfranker.badz28.com/fbody/sequential.htm
you could basically make this if you had the old couger sequential box, although I'm sure now its cheaper to buy it off these people
(oh and I know its a 4th gen, but it doesn't take a genius to make this work for a 3rd gen)
Also in a magazine I have a guy used 2 caddy elderado tail lights one on top of each other for each side, it looked pretty good.
http://www.bfranker.badz28.com/fbody/sequential.htm
you could basically make this if you had the old couger sequential box, although I'm sure now its cheaper to buy it off these people
(oh and I know its a 4th gen, but it doesn't take a genius to make this work for a 3rd gen)
Also in a magazine I have a guy used 2 caddy elderado tail lights one on top of each other for each side, it looked pretty good.
Last edited by crazycrocket; 07-29-2005 at 07:15 PM.
#10
Member
Join Date: Jan 2004
Location: baltimore, md
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 305
Transmission: 700r4
Originally posted by stonedchihuahua
Also in a magazine I have a guy used 2 caddy elderado tail lights one on top of each other for each side, it looked pretty good. [/B]
Also in a magazine I have a guy used 2 caddy elderado tail lights one on top of each other for each side, it looked pretty good. [/B]
#11
Member
Join Date: Mar 2003
Location: Alberta
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 camaro
Well they want ideas so I'm giving them. If people don't wanna do custom work then they can't expect custom results. When everyone uses the same bolt ons you get a whole bunch of carbon copy cars.
#12
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Albany, NY Area
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Car: Red on Red 89 RS
Engine: LO3 305 TBI
Transmission: TH-700R4
Axle/Gears: 10-bolt / 2.73
we're trying to locate bolt-on tail lights for 3rd gen f-bodes.
I'm considering putting some '02 tails on my '89 though.
I'm considering putting some '02 tails on my '89 though.
#13
Supreme Member
iTrader: (5)
Join Date: Aug 2004
Location: Redondo Beach CA
Posts: 1,912
Likes: 0
Received 0 Likes
on
0 Posts
Car: '02 Z06
Originally posted by jimp2001
we're trying to locate bolt-on tail lights for 3rd gen f-bodes.
I'm considering putting some '02 tails on my '89 though.
we're trying to locate bolt-on tail lights for 3rd gen f-bodes.
I'm considering putting some '02 tails on my '89 though.
#16
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Albany, NY Area
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Car: Red on Red 89 RS
Engine: LO3 305 TBI
Transmission: TH-700R4
Axle/Gears: 10-bolt / 2.73
Originally posted by astoria18
Good luck with that.
Good luck with that.
I want to try and make a fiberglass mold that will bolt into the stock location. like an adapter to install 93-02 tails. I bet if I could constuct a set, I would be able to get a company to mass produce them.
#18
Supreme Member
iTrader: (2)
Join Date: Oct 1999
Location: Minnesota
Posts: 1,794
Likes: 0
Received 16 Likes
on
10 Posts
Car: 1990 Formula
Engine: 350 TPI
Transmission: Auto
Axle/Gears: 3:73 Posi
Personally I really like the grid style tail lights with the Niteshades paint on them. I did a pair for a guy I was building an Iroc for and they looked really sweet on a Black 87 Iroc. I also did the front side markers, front turn signals and third brake light in the rear spoiler. Sorry no pix, he turned into a real piece of work, so I gave him the car back in pieces.
#20
Supreme Member
Join Date: Nov 2003
Location: ohio
Posts: 1,296
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1997 S10
Engine: 4-Cyl 2.2 Liter
Transmission: Automatic
this is the only ohter one i have ever seen http://www.camarokits.com/taillite.htm
i wish some one would make a cool tasteful set of aftermarket taillights
i wish some one would make a cool tasteful set of aftermarket taillights
#21
Supreme Member
iTrader: (5)
Join Date: Aug 2004
Location: Redondo Beach CA
Posts: 1,912
Likes: 0
Received 0 Likes
on
0 Posts
Car: '02 Z06
I agree, the only way it would look good imo, is if the lense takes up the entire area of the stock location, rather than only some of it and the rest of the space body color like all the ones pictured.
#22
Supreme Member
Join Date: Nov 2004
Location: Connecticut
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC w/Danko bodykit, 1988 iroc vert, 1989 k1500 pickup 6" lift and 35" tires, 2002 chevy tahoe z71
Engine: 383 stealth ram, 305 tpi, 350 tbi, 5.3l
Transmission: T56, 700r4, 700r4, 4l460
motion use to make the kits but i heard that they are discontinued. also third gen resource was suppose to get them. they were waiting for the vender to make them so i dont know what happen. let me know what anyone finds out about it. i want a set but its kind of expensive for the set
#23
Senior Member
Join Date: Apr 2000
Location: Anoka, Mn
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
This is what I think would be a really cool tail light mod.
The next time you guys see a cadillac deville driving around, pay special attention to the tail lights and how they light up. It's like the tail light lights up perfectly uniform and its really quick like they are LEDs but I have no idea. The are really cool looking in terms of how they light up.. in my opinion anyways..
I would like to make some custom camaro taillights that light up and look just like that.
They have a picture of the taillights lit up on the cadillac website, but they don't do it justice.
The next time you guys see a cadillac deville driving around, pay special attention to the tail lights and how they light up. It's like the tail light lights up perfectly uniform and its really quick like they are LEDs but I have no idea. The are really cool looking in terms of how they light up.. in my opinion anyways..
I would like to make some custom camaro taillights that light up and look just like that.
They have a picture of the taillights lit up on the cadillac website, but they don't do it justice.
#24
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Albany, NY Area
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Car: Red on Red 89 RS
Engine: LO3 305 TBI
Transmission: TH-700R4
Axle/Gears: 10-bolt / 2.73
91/2 GTA remind me of the lights you are talking about.
I think I'm going to get a set of Z-28 lights, paint the black "grid" area to match the car, then use a transparent paint to "black out" the tail light...
I grabbed a set of '93 tail lights, and they are too small and dont look right.
too bad they dont make those c4 tail conversions anymore, I would really like to see the same setup but with c6 lights in it.
I think I'm going to get a set of Z-28 lights, paint the black "grid" area to match the car, then use a transparent paint to "black out" the tail light...
I grabbed a set of '93 tail lights, and they are too small and dont look right.
too bad they dont make those c4 tail conversions anymore, I would really like to see the same setup but with c6 lights in it.
#25
Member
Join Date: Jan 2004
Location: baltimore, md
Posts: 100
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Camaro RS
Engine: 305
Transmission: 700r4
Originally posted by smokefan
motion use to make the kits but i heard that they are discontinued. also third gen resource was suppose to get them. they were waiting for the vender to make them so i dont know what happen. let me know what anyone finds out about it. i want a set but its kind of expensive for the set
motion use to make the kits but i heard that they are discontinued. also third gen resource was suppose to get them. they were waiting for the vender to make them so i dont know what happen. let me know what anyone finds out about it. i want a set but its kind of expensive for the set
#27
Senior Member
iTrader: (1)
Join Date: Feb 2005
Location: Bonham TX
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 & 89 Iroc's
Engine: 5.0 - 5.7
Transmission: 700R's
Axle/Gears: 2.77 - 3.70
Originally posted by exotikcamaro
I talked to motion last year and they were still making them
I talked to motion last year and they were still making them
#28
Supreme Member
Join Date: Nov 2004
Location: Connecticut
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC w/Danko bodykit, 1988 iroc vert, 1989 k1500 pickup 6" lift and 35" tires, 2002 chevy tahoe z71
Engine: 383 stealth ram, 305 tpi, 350 tbi, 5.3l
Transmission: T56, 700r4, 700r4, 4l460
yea the demand isnt there for the lights anymore so motion stopped making them. there is a guy i know that does fiberglass work and if he gets a certain amount of people he will make the mold for them. he is going to want money up front for half of the cost cause he doesnt want to get screwed by making the mold and only selling a handful.
#29
Senior Member
iTrader: (1)
Join Date: Feb 2005
Location: Bonham TX
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 & 89 Iroc's
Engine: 5.0 - 5.7
Transmission: 700R's
Axle/Gears: 2.77 - 3.70
Originally posted by smokefan
yea the demand isnt there for the lights anymore so motion stopped making them. there is a guy i know that does fiberglass work and if he gets a certain amount of people he will make the mold for them. he is going to want money up front for half of the cost cause he doesnt want to get screwed by making the mold and only selling a handful.
yea the demand isnt there for the lights anymore so motion stopped making them. there is a guy i know that does fiberglass work and if he gets a certain amount of people he will make the mold for them. he is going to want money up front for half of the cost cause he doesnt want to get screwed by making the mold and only selling a handful.
#30
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Albany, NY Area
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Car: Red on Red 89 RS
Engine: LO3 305 TBI
Transmission: TH-700R4
Axle/Gears: 10-bolt / 2.73
Originally posted by NoItsNotForSale
I talked to motion this year and they are not.
I talked to motion this year and they are not.
#31
Supreme Member
Join Date: Nov 2003
Location: surrey b.c. canada
Posts: 3,383
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Iroc
Engine: lb9
Transmission: wc t-5
Axle/Gears: 10 bolt 3.08 posi
Originally posted by 91rsowner4life
this is the only ohter one i have ever seen http://www.camarokits.com/taillite.htm
i wish some one would make a cool tasteful set of aftermarket taillights
this is the only ohter one i have ever seen http://www.camarokits.com/taillite.htm
i wish some one would make a cool tasteful set of aftermarket taillights
#32
Supreme Member
Join Date: Nov 2004
Location: Connecticut
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC w/Danko bodykit, 1988 iroc vert, 1989 k1500 pickup 6" lift and 35" tires, 2002 chevy tahoe z71
Engine: 383 stealth ram, 305 tpi, 350 tbi, 5.3l
Transmission: T56, 700r4, 700r4, 4l460
Originally posted by NoItsNotForSale
How much?
How much?
#33
Senior Member
iTrader: (1)
Join Date: Feb 2005
Location: Bonham TX
Posts: 661
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 & 89 Iroc's
Engine: 5.0 - 5.7
Transmission: 700R's
Axle/Gears: 2.77 - 3.70
Originally posted by jimp2001
Can someone PM me contact info for motion... I would like to get in touch with them. Thanks.
Can someone PM me contact info for motion... I would like to get in touch with them. Thanks.
516-223-3172
#34
Supreme Member
Join Date: Nov 2003
Location: ohio
Posts: 1,296
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1997 S10
Engine: 4-Cyl 2.2 Liter
Transmission: Automatic
Originally posted by kretos
man these cars look like mustangs, ugly cars and ugly lights
man these cars look like mustangs, ugly cars and ugly lights
#35
Senior Member
Thread Starter
Join Date: Feb 2004
Location: Albany, NY Area
Posts: 860
Likes: 0
Received 0 Likes
on
0 Posts
Car: Red on Red 89 RS
Engine: LO3 305 TBI
Transmission: TH-700R4
Axle/Gears: 10-bolt / 2.73
Originally posted by NoItsNotForSale
1-800-866-3172
516-223-3172
1-800-866-3172
516-223-3172
#36
Senior Member
Join Date: Sep 1999
Location: Emmaus, Pa
Posts: 764
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro IROC Z28
Engine: 355
Transmission: 1994 T56
Axle/Gears: BW 3.27 (stock)
Originally posted by Dave84Bird
Here's a pic I found on the Internet a while ago. I know there is a company that makes this kit, I just don't know who it is.
Here's a pic I found on the Internet a while ago. I know there is a company that makes this kit, I just don't know who it is.
and for the person who mentioned it, you're right it doesn't have rear marker lights. I'm not sure of the legality of needing both front and rear side markers though, never looked into it and i haven't had a problem yet either. Realistically you will see that the blinker is on from the rear, side and front anyway though.
and in case it wasn't obvious, the license plate lights are the top two license plate bolts - they're a kit designed for street rods that light up the plate. The bottom two bolts are LED's that i have wired up as reverse lights. again, not the best solution either, but it works, and i haven't had an inspection problem yet either.
and regarding the if you want the vette lights buy a vette comment, i've heard it a dozen times. if you don't like them, then don't buy them. simple enough, right? It's not your car. did it ever occur to you that one factory vehicle might not encompass everything a person wants in a vehicle? I love the thirdgen camaros general shape, but i always hated the taillights. I like what i have better. is it the ideal solution? no, but in my opinion it beats stock. and the car certainly has the ***** to back up any look i want to give it. I think a lot of people with "buy a vette" sort of comments would think i was trying to make a poor man's vette or something, and that my car wouldn't hold a candle to a stock vette. not the case at all. if you want more info on the drivetrain, i'd be more than happy to discuss.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM