So I just wrecked my car...
05-12-2005, 11:50 PM
#1
Member
Thread Starter
Join Date: Oct 2003
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89' RS
Engine: 2.8 V6
Transmission: 700R4
So I just wrecked my car...
I was comming home from work today and took a corner a lil too fast and I just slide off the road wrecking my whole front end and denting my rim. My whole front is messed up and one of my fenders.
I am hopein that this is all that was done, car runs fine, didn't do anything past cosmetic by the looks. My car pulls to the left way hard but I am sure it's out of alignment after jumpin the curb, lol.
Anyone know about how much this is going to cost me? I'll need the front left fender (hopefully can get cheap at a junkyard), the whole front nose, and a front skirt. The paint we'll see...I am not counting that in yet, haha.
If anyone has any of these parts lemme know, definatly in the market to pick em up.
I'll have pics up soon so you can see the sad damage
.
~Brian
I am hopein that this is all that was done, car runs fine, didn't do anything past cosmetic by the looks. My car pulls to the left way hard but I am sure it's out of alignment after jumpin the curb, lol.
Anyone know about how much this is going to cost me? I'll need the front left fender (hopefully can get cheap at a junkyard), the whole front nose, and a front skirt. The paint we'll see...I am not counting that in yet, haha.
If anyone has any of these parts lemme know, definatly in the market to pick em up.
I'll have pics up soon so you can see the sad damage
.~Brian
05-13-2005, 12:17 AM
#2
Senior Member
iTrader: (3)
Join Date: Jan 2005
Location: San Angelo, TX
Posts: 517
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Pontiac firebird
Engine: '93 LT1
Transmission: Built 700R4
Axle/Gears: 3.70 9 bolt
when i wrecked mine, i got all the parts off of here for like $240. i got a hood, fender, bumper cover, headlights and blinkers....that doesn't include shipping though.
05-13-2005, 12:23 AM
#3
Supreme Member
Join Date: Nov 2004
Location: Connecticut
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 IROC w/Danko bodykit, 1988 iroc vert, 1989 k1500 pickup 6" lift and 35" tires, 2002 chevy tahoe z71
Engine: 383 stealth ram, 305 tpi, 350 tbi, 5.3l
Transmission: T56, 700r4, 700r4, 4l460
i dont know where you are located but i have a 91 rs hood and a set of iroc rims with tires. pm me if your intersted
05-13-2005, 07:23 AM
#7
Member
Thread Starter
Join Date: Oct 2003
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89' RS
Engine: 2.8 V6
Transmission: 700R4
one of the metal supports on a power pole and a telecomunications box ( they are 30k to replace.....looked to be in decent shape so lets hope).
I don't need a hood, it didn't hurt that. just front left fender , the whole front bumper, and front grd fx.
will have pics up later, have work :-P.
I don't need a hood, it didn't hurt that. just front left fender , the whole front bumper, and front grd fx.
will have pics up later, have work :-P.
Trending Topics
05-13-2005, 12:51 PM
#12
Supreme Member
iTrader: (4)
Join Date: Nov 2003
Location: santa barbara,ca
Posts: 1,194
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 iroc z
Engine: LSX 376 F1A
Transmission: 4l60e
Axle/Gears: 12 bolt 3.42
that aint bad at all. u just need a nose and a fender. i doubt u bent the frame.
05-13-2005, 08:28 PM
#15
Member
Thread Starter
Join Date: Oct 2003
Posts: 130
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89' RS
Engine: 2.8 V6
Transmission: 700R4
Northern Utah. I dunno how fast I was goin, but normal for normal weather, it was rainin andh ad been for a whole week. caught the water wrong and just slid. I noticed my other fender is bent to (on the front rigth side diggin into the mud and hittin the box) and there is a dent, or bend (not sure which yet) on the bottom of my passanger side pillar behind the fender and hood. There is no metal touchin it so I doubt anything came back and hit it. I am hopin it was already there but I doubt it, I think I would have noticed it. I'll get a pic of this also tomorrow when I begin to work on it.
With the kink, bend, dent, whatever there, any ideas on what's f*cked when I take everything off?
With the kink, bend, dent, whatever there, any ideas on what's f*cked when I take everything off?
05-15-2005, 11:36 AM
#16
Supreme Member
iTrader: (1)
Join Date: Jul 2002
Location: sacramento, ca USA
Posts: 2,789
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 iroc-z 5.7tpi 350,
Engine: 5.7tpi 350,
Transmission: T-56 fully built WOOHOO
probably gonna need a new impact bar... check your radiator core support for it being straight, also that your frame rails didnt get bent up at all...
Thread
Thread Starter
Forum
Replies
Last Post
LiquidBlue
History / Originality
10
09-13-2015 02:24 PM