What gauges?
01-18-2005 | 04:59 PM
#1
Thread Starter
Senior Member
Joined: Dec 2004
Posts: 909
Likes: 1
From: New York
Car: 91 Firebird
Engine: 3.1 V6
Transmission: TH-700-R4
What gauges?
I would like to get a Gauge Pillar in my car with 2 small gauges.Just wondering...What gauges should I go with? I dont mean brand name but as what they measure.
I was thinking Transmission Temp and Fuel pressure.
I was thinking Transmission Temp and Fuel pressure.
01-19-2005 | 08:15 AM
#2
Member
iTrader: (1)
Joined: Aug 2002
Posts: 239
Likes: 0
From: Suffolk VA, Cleveland NY
Car: 84 Berlinetta
Engine: junk 350
Transmission: TH350
Axle/Gears: Moser 4.56
I would run Vacuum and AFR. Mainly because that's what I am running.
Trans temp you probably wont need unless you are using a high stall convertor.
Fuel Pressure is handy, but I don't think you need to spend the extra cash to run one inside, I have one on my fuel rail that works fine. Once the pressure is set, it usually doesn't move.
Have fun!
Trans temp you probably wont need unless you are using a high stall convertor.
Fuel Pressure is handy, but I don't think you need to spend the extra cash to run one inside, I have one on my fuel rail that works fine. Once the pressure is set, it usually doesn't move.
Have fun!
Thread
Thread Starter
Forum
Replies
Last Post