Has anyone put aftermarket tach in place of the facotry tach on a 90-92 camaro?
02-28-2003, 09:45 AM
#1
Supreme Member
Thread Starter
Join Date: Mar 2001
Location: Portland, OR www.cascadecrew.org
Posts: 6,577
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
Has anyone put aftermarket tach in place of the facotry tach on a 90-92 camaro?
Hi, my factory tach is WAY off, i was on the dyno a couple of weeks ago, and factory tach was off by sevaral K. i was thinking of buying a 3 3/4" autometer tach, and was wondering if anyone has taken out their factory tach, and replaced it, i know i would need to make a customer from plate, but is there room for one there, and woudl i be able to retain the rest of the factory gauges?
02-28-2003, 10:24 AM
#2
Moderator
https://www.thirdgen.org/techbb2/sho...92#post1171292
Check out this thread. On page 2, there is a post by Mr_Dude about half way down. He has one in his car and he explains how he did it.
Notice I didnt say "do a search"?
Hope this helps. Thomas
Check out this thread. On page 2, there is a post by Mr_Dude about half way down. He has one in his car and he explains how he did it.
Notice I didnt say "do a search"?
Hope this helps. Thomas
02-28-2003, 10:30 AM
#3
Supreme Member
Thread Starter
Join Date: Mar 2001
Location: Portland, OR www.cascadecrew.org
Posts: 6,577
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
sorry, i did a search 3 times, and found lots of info, including that. i am specificly trying to find out if anyone had put it in a 90-92 style dash, while keeping the rest of the gauges.
Thread
Thread Starter
Forum
Replies
Last Post
db057
TBI
10
08-11-2015 10:11 PM
