TheLG4Whore

Hey TomP let me know what you gotta say about this!
free parts:Cylinder heads,Exaust manifolds,distributor(HEI),Coil,aircleaner,New distributor cap,Spark plugs!
This is my current progress on the body.
I need a fender as you can see.

TheLG4Whore

Here's the first of many pics.
Anyone got a fender they wanna give me as long as it doesn't have torn sheet metal.
I just love bodywork don't you?

TheLG4Whore

2
More surface rust of course.

TheLG4Whore

3
Filled in and ground down rust just like below.

TheLG4Whore

4
This if the filling of the surface rust I ground down then filled.
I hate that ****in rust.

TheLG4Whore

5
That lower part had to be filled where the body molding was cause when i took it off the paint came whith it.
and the top part of the wheel well had a dent ,probably from those run away shopping carts.

TheLG4Whore

6
Right here I'm test fitting everything.
If you can get to my place you can have all the parts listed below and this intake and heads,also a modified A/C mounting bracket which you need for headers.
Ohh and you can have the carb too!

TheLG4Whore

7
Once again a really shallow but long dent that was overlooked by myself.
This is really annoying to get sanded straight , but I'll get it .

TheLG4Whore

8
One of those long shallow dents that the last owner filled but didn't do that great of a job on.

TheLG4Whore

9
I made the whole bottom and corner halfs of the body panel.
Don't ya just love my fiberglass skills!
I'll mark the photo later to show you how much I did.

TheLG4Whore

10
Covered the cut out rust whith fiberglass and truck bedliner.
That's temporary until all the fiberglass gets done.

TheLG4Whore

11
Really annoying cause it's next to the window liner/stripping piece.

TheLG4Whore

12
More body filling.

TheLG4Whore

13
This one is cool!
I'm working on making these into blacked out clear taillights!
They are gonna be nice,maybe nicer than the pair I did for my brothers Maxima.

TheLG4Whore

14
A dent I'm gonna be pounding out and then filling soon on my brother's RX-7.

TheLG4Whore

15
Four shhiiity paint jobs.
Anyone know how we should strip it for paint.
Chemical or sanding?

TheLG4Whore

16
Anyone wanna buy an 11a mazda rotory engine out of an '83 RX-7?

TheLG4Whore

17
Want formula rims for a tiny price?

TheLG4Whore

18
Free exaust manifolds,dist,coil,sparkplugs(Stock gap),air cleaner,cylinder heads which you can't see but they are in the engine pic and they are the stock LG4's,and anything else I don't want if you come to pic them up.
Ohh and a smog pump too.

3.1EyeCandy

iTrader: (3)

Is this a project car or did your car turn into a piece? I've never seen anybody fix a car's exterior and then give away the engine. Have fun...I guess.

TheLG4Whore

I said you can have the cylinder heads and intake manifold.
NOT the engine, I'm buying the whole top end new.
Want some free ****?
It's a project car and it's in such crap shape cause I chose to do so much body work which will need to be done if I'm painting it black.

TheLG4Whore

Now come on you people must want some free parts!:lala:

383strkr84z

Looks like your doing a great job, Keep up the good work!!! I have pretty much stopped on mine (i'm just not motivated!) For the paint removal, I suggest Stripper - Thats what I used for 3 layers of paint on mine, and it worked great (kept the dust down too). Keep us posted on the work, this is exciting to watch!!

FyreLance

How much of a tiny price?

TheLG4Whore

$50 for two without tires
I also got 1994 Q45 rims but I'm not gonna go there.
If I'm feelin generous I'll give you the tires.
Ya this is a project of mine.
Pretty much it'll be a trans-am look alike but I'm fabricating a set of lights to look like the scanner lights from knight rider.
I'm gonna be buyng all the ground effects and bumpers from the bone yard sometime this week.
I'll keep this project posted.

wolffman007

iTrader: (1)

hey
you said you have a modifed AC bracket for headers? I may be interested in that. My ac was stripped out by previous owner, but I want to put it back in & will need a modified bracket. Since I know the stock bracket wont fit my headers.
Shawn

TheLG4Whore

Well I could make you one if you have the original or I could show you.
It requires welding if you want a top quality fit and to make it work right and it'll look better my way.
Let me know if you want it or whatever.
I posted pics of my power steering bracket mod on another thread.
Just give me a holler if you guys want some free shiit!
I can't belive noone has asked me yet for the freebies.

Ratstix

i'll give ya shipping +20 bux for the heads. (fully assembled, or just the heads?)
i always did want to try my hand at porting.

TheLG4Whore

fully assembled minus the rocker arms.
I'll give you the heads for free if you can pick them up but whatever.
How much do you think shipping will be?
And my guess if the heads way about 100Lbs right!
PM me and we'll talk.

TheLG4Whore

I still got some free ,exaust manifolds,intake,carb,whole ignition,air cleaner and bosch platinums.
I'm just tryin to give back to the third gen'ers.
By the way where is TomP?

Ratstix

thanks for the offer but i just looked it up and shipping would be a minimum of 70 bux. and thats 70 i dont have right now. nermind
thanx anyway

NTChrist

TheLG4Whore:

Thanks for the offers, man!

I don't actually need any of your parts (unless by some freak chance your distributor ISN'T computer controlled), but it's nice to see you giving away the stuff, rather than trying to make a buck off of some poor guy that needs the junkyard parts to get his car running.

Congrats, you get a Lala award:

:lala:

Haha!

Makai

This is just a shot in the dark, but did this car have louvers on it? All I need is the mounting hardware. 4 clips for the window and 1 turn screw?
Hmm, I also need the lid to the center console for the 86 transam, but since your redoing the interior i guess thats out

TheLG4Whore

Ya well I'm just a nice guy!
I'm surprised poeple don't want my free **** it's not like it's freekin booby trapped.
One man's shiit is another man's craap like I say.
I don't wanna throw this **** out ya know.

TheLG4Whore

no it is computer controlled and that's why I don't want it.
but come on you must want some manifolds.
Sorry no louvers or trans am crap.

92RSMuscle

iTrader: (1)

ill take whatever is left over...i live in nj...central nj
dude, please lemme know whats left
my e-mail is time_to_shine@hotmail.com

maverick544

How much u want for one of those rims without the tire. I jsut need ONE!! lol well maybe I'll take a pair and just have a full size spare or something. ANyways how much for them. Also u got and lil interior stuff u wanna get rid of. Also is that ur 3.4L or what.

TheLG4Whore

I'ts a 5.0.
I've got everything left
Noone has taken any of it.
PM me if you wanna have it.

1987fbd

Hey I want your cc carb. I can't come over to get it cause i am about 3000 miles away from you but i will send you the money to ship it to me. If you still have it. Also is your ECM in the car still, I could use that as well.:hail:

TheLG4Whore

no tthe ECM and that fucckin black box is sitting on my table.
you can have it.

Ward

iTrader: (1)

Those are not formula wheels, they are just normal 84-92 Firebird wheels. They are 15X7", whereas the formula wheels are a satin silver finish, and are 16X8" wheels.

deadbird

Actually, if you want to get even more picky, they are a machined finish with a clear coat.

Ward

iTrader: (1)

Damnation!
Ok if you want to get REALLY technical...

For those mIRC users:
/me bitch slaps deadbird

For those VB Programmers:
Sub BitchSlap()
Nick1$ = "Ward"
Nick2$ = "deadbird"
Sentence$ = Nick1$ + " bitch slaps " + Nick2$
msgbox Sentence$, "", VBOkOnly
End Sub

For those QBasic programmers:
print "Ward bitch slaps deadbird"

For those JavaScript Programmers:
function Bitchslap() {
alert('Ward bitch slaps deadbird');
}

For the rest of you, I just bitch slapped deadbird in 4 different programming languages
I have waaaaaay too much free time...
:lala:

Ratstix

ROTFLMAO!!!! :sillylol:


that has got to be the funniest chit i've seen in a long time.

AceDeuceTrace

Got any rear seat mounting hardware???

Thanks,
-Trace

TomP

I think I'm a bit rusty with my java, but hey, why not...

<pre>
private Person dude;

public void main(String args[]) {

Thread laugh = new Thread(new Runnable() {
public void run() {
while (true) {
dude.layOnStomach;
Thread.yield();
dude.layOnLeftSide;
Thread.yield();
dude.layOnBack;
Thread.yield();
dude.layOnRightSide;
Thread.yield();
}
}
}

Thread laugh = new Thread(new Runnable() {
public void run() {
while (true) {
dude.laugh(5);
Thread.sleep(100);
dude.breathe;
}
}
}

while (true) {
roll.start();
laugh.start();
}
}
</pre>

LG4, looks good! I bet you can't wait until it's all finished! Did you treat the rust at all, or did you just grind it away? And I hear the drip rails at the top of the roof, by the windows, are removable... do a search for drip rails on this forum and you'll probably find my old message. I like the fiberglass work, especially at the back! Do you have a "long board" sander for those long/shallow dents? They really help with getting things straight. Found mine at a local tool store (not an auto store), http://www.eastwoodcompany.com has some really nice ones but be prepared to pay out the butt for 'em.

[edit] Stupid blippin' html not taking tabs... argh