t-tops
#1
t-tops
i have a question on my t tops i have a 92 25th ann rs and it has differnt t tops thenany other camaro that i know of there lighter and get a little flex to them at a higher rate of speed and there not glass there like a stronger plexie glass one of my buddys got a 92 ann too an hes got the same tops.if anybody knows anything about them let me know is it an anniversary thing or something
#5
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,242
Received 170 Likes
on
125 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
I have a set of the Acrylic tops from an 89, I think they made them from 89-91 or early 92.
I think what there made of is confusing to some people because they say "Leximar" on the top of the top. "Leximar" is the hard coating they used on them to resist scratches better. On the underside of mine they have a sticker that sais "Acrylic".
Lexan is Polycarbonate, and scratches really easily.
Plexiglas is Acrylic.
John
I think what there made of is confusing to some people because they say "Leximar" on the top of the top. "Leximar" is the hard coating they used on them to resist scratches better. On the underside of mine they have a sticker that sais "Acrylic".
Lexan is Polycarbonate, and scratches really easily.
Plexiglas is Acrylic.
John
Last edited by okfoz; 06-26-2002 at 10:09 AM.
#6
Senior Member
Join Date: May 2002
Location: www.hrfbody.com
Posts: 560
Likes: 0
Received 0 Likes
on
0 Posts
Car: www.hrfbody.com
Engine: www.hrfbody.com
Lexan t-tops are much better becuase they will form to your t-tops in the heat and cold better than glass tops and won't leak. My g/f has these on her 91 Trans AM and spouts this off to me all the time.
I dunno, my glass tops have never leaked.... but mine will burn your hand if its been in a parking lot and you try taking them off, hers stay fairly cool all the time.
I dunno, my glass tops have never leaked.... but mine will burn your hand if its been in a parking lot and you try taking them off, hers stay fairly cool all the time.
#7
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,242
Received 170 Likes
on
125 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
THAt is how I tell if something is glass or plastic. If you put your hand on Glass on a HOT day, they feel HOT, or Cold on a cold day.
BUT on plastic, there always kind of luke warm, not REALLY hot or really cold. The reason is, Glass conducts heat much better.
John
BUT on plastic, there always kind of luke warm, not REALLY hot or really cold. The reason is, Glass conducts heat much better.
John
Trending Topics
#8
TGO Supporter
iTrader: (2)
Join Date: Oct 2001
Location: Englewood, CO
Posts: 926
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Trans Am
Engine: Lb9
Transmission: factory T5
Axle/Gears: 3.08 limited slip
ive owned 2 early thirdgens and neither had ttop leaks, and i like the glass ones when they kind of reflect your interior but you still see through them late at night
#9
Member
Join Date: May 2002
Location: Centreville Va
Posts: 169
Likes: 0
Received 1 Like
on
1 Post
Car: 92 RS
Engine: 350
Transmission: auto
Axle/Gears: 2.73
I just had to replace the driver t-top after being witness to the sound of POP! I have a 92 RS with the lexan tops, and went to the junkyard today to get a replacement. I found one off a 92 bird and it looks like crap but seals nice, guy gave me a break on the top since the seats he sold me have stains i still cant quite get out fully, so the top was only 40 bucks.
I told the guy at the junkyard if he gets his hands on a really really nice set of glass ones then Ill buy them and try converting their pins over to fit lexan holes. Then I have the best of both worlds
I told the guy at the junkyard if he gets his hands on a really really nice set of glass ones then Ill buy them and try converting their pins over to fit lexan holes. Then I have the best of both worlds
Thread
Thread Starter
Forum
Replies
Last Post
1Aauto
Sponsored Vendors
1
01-15-2016 06:26 AM
Thirdgen89GTA
NW Indiana and South Chicago Suburb
4
11-26-2015 11:04 PM