Changing T-top locks
#1
Changing T-top locks
My girlfriend has an 89 Camaro with those plastic t-tops on it. They're cracked and she wants the ones off of a parts car that I have. I was wondering if anyone could tell me how to change the locks in them and also where I can get some weather stripping before I change them over. thanks
#2
Supreme Member
Join Date: Jan 2001
Location: Phoenix, AZ, USA
Posts: 1,141
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 T/A - Sold (sniff) 1980 T/A Pa
Weatherstripping is available from the dealer, year one, junk yard etc.
Remove the handle. Mine has a torx bit screw in it.
Remove the 3 screws holding the black plastic cover to the bottom of the t-top.
Drill out the 2 rivets holding the metal shield by the face of the lock.
Remove the clip from behind the lock and remove the lock.
Replace in the reverse order. I used rivets and replaced the shield, but the shield isn't necessary, so you wouldn't have to re-attach it.
Good Luck!
Remove the handle. Mine has a torx bit screw in it.
Remove the 3 screws holding the black plastic cover to the bottom of the t-top.
Drill out the 2 rivets holding the metal shield by the face of the lock.
Remove the clip from behind the lock and remove the lock.
Replace in the reverse order. I used rivets and replaced the shield, but the shield isn't necessary, so you wouldn't have to re-attach it.
Good Luck!
Thread
Thread Starter
Forum
Replies
Last Post
corlando52
Interior Parts Wanted
0
08-24-2015 11:32 AM
Zachattack0925
Tech / General Engine
2
08-12-2015 09:54 PM
Zachattack0925
Transmissions and Drivetrain
4
08-12-2015 09:52 PM