Factory location of IROC-Z door decals???
03-19-2002 | 02:51 PM
#1
Thread Starter
Member
iTrader: (1)
Joined: Mar 2002
Posts: 198
Likes: 1
From: Indiana, PA
Car: 86 IROC
Engine: SC'ed 350
Transmission: 700R4
Axle/Gears: 4.11 12bolt
Factory location of IROC-Z door decals???
Does anyone know or know of a site that has documentation on the exact position of the IROC-Z door decals?
I see many IROCs on the web and it seems that everyone has them in a different location on the door. Just wanted to know where they were located on the door from the factory. Plus was this location consistant through 85-90?
Thanks
Joe
I see many IROCs on the web and it seems that everyone has them in a different location on the door. Just wanted to know where they were located on the door from the factory. Plus was this location consistant through 85-90?
Thanks
Joe
03-19-2002 | 03:34 PM
#2
Member
Joined: Dec 2001
Posts: 365
Likes: 0
From: Newfoundland, Canada
Re: Factory location of IROC-Z door decals???
Originally posted by wwnf
was this location consistant through 85-90?
was this location consistant through 85-90?
Nope, I think the older ones had them on the back of the door and the newer ones had them on the front of the door (or the other way around)
03-19-2002 | 05:20 PM
#4
Supreme Member
Joined: Jan 2000
Posts: 3,178
Likes: 46
From: Tracy, CA
Car: '87 IROC
Engine: LB9
Transmission: TH700R4
Originally posted by Mark A Shields
85-86 Front of door . And the rest were towards the back. Not exactly sure about 87 though.
85-86 Front of door . And the rest were towards the back. Not exactly sure about 87 though.
06-01-2011 | 08:57 PM
#6
Member
Joined: Jan 2009
Posts: 187
Likes: 0
From: Dwight, NE
Car: 1985 IROC Z28
Engine: L98 - 350/650 Holley DP
Transmission: 700R4
Axle/Gears: 3:83 Full Spooled
Re: Factory location of IROC-Z door decals???
cool, i get to bring a thread from 9 years ago back to life!!
tried looking online and google and all but nothin answers my question...
WHY?
why did they change and what made them put them there?
no retarded *** answers either please...
tried looking online and google and all but nothin answers my question...
WHY?
why did they change and what made them put them there?
no retarded *** answers either please...
06-01-2011 | 09:13 PM
#7
Senior Member
iTrader: (6)
Joined: Mar 2002
Posts: 587
Likes: 1
From: middle TENNESSEE
Car: 1989 Iroc rebuild
Engine: 355 carb'd
Transmission: 5spd
Axle/Gears: 3:08 pos for a while
Re: Factory location of IROC-Z door decals???
the black stripe around bottom flipped at the door location change',black/over color 88-90
Trending Topics
07-05-2012 | 09:47 PM
#8
Member
Joined: Jan 2009
Posts: 187
Likes: 0
From: Dwight, NE
Car: 1985 IROC Z28
Engine: L98 - 350/650 Holley DP
Transmission: 700R4
Axle/Gears: 3:83 Full Spooled
Re: Factory location of IROC-Z door decals???
So here we go again with my retarded questions and bringing life back to dead threads...
I just got the car painted and I'm going to be putting new decals on... can someone give me measurements for the decals on the front of the door...
How many inches from the bottom of the door up to the bottom of the decal
How many inches from the front of the door back to the end or the "z" of the decal on the passenger side and then of course it would be the same inches to the "i" on the driver side
Thanks for the help!
I just got the car painted and I'm going to be putting new decals on... can someone give me measurements for the decals on the front of the door...
How many inches from the bottom of the door up to the bottom of the decal
How many inches from the front of the door back to the end or the "z" of the decal on the passenger side and then of course it would be the same inches to the "i" on the driver side
Thanks for the help!
07-05-2012 | 10:29 PM
#9
Supreme Member
Joined: Jan 2000
Posts: 3,178
Likes: 46
From: Tracy, CA
Car: '87 IROC
Engine: LB9
Transmission: TH700R4
Re: Factory location of IROC-Z door decals???
The IROC-Z decals were on a pre-mask. The pre-mask was lined up with the door edges which automatically located the decal itself.
I measured the location of my door decals and came up with these measurements. It should be the same for the driver's side door. (Geez......Someday, I really need to remove all that dust and excess wax.....)
I hope this helps.
I measured the location of my door decals and came up with these measurements. It should be the same for the driver's side door. (Geez......Someday, I really need to remove all that dust and excess wax.....)
I hope this helps.
07-11-2012 | 07:55 AM
#11
Senior Member
Joined: Mar 2009
Posts: 870
Likes: 0
From: Brick, NJ
Car: 91 Trans Am
Engine: 355 TPI
Transmission: Built T-5
Re: Factory location of IROC-Z door decals???
you should make templates for that and see the rights. now that more people are re painting and decaling this car. I got the measurements for the GTA emblems from someone on the GTA source page but I had to make a template for them and compinsate for the door moulding delete. does anyone have the other location IROC door decal measurements? just for reference
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
05-10-2023 07:19 PM
colton_carlson
Firebirds for Sale
7
03-08-2019 12:21 PM
