Best Metal Polish
#1
Supreme Member
Thread Starter
Join Date: Oct 2000
Location: Warner Robins, Ga
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 350 TPI
Transmission: 700R4
Best Metal Polish
Well, I have been playing around with the different polishes. Here's what I found.
Eagle One (one with jewelers rouge). Excellent shine, Comes off easier than most, has a good shelf life.
Never Dull (eagle one as well I believe). Pretty good shine, don't need one towel to apply and one to take off since it comes in cotton like form. Shelf life is great, works well.
Mothers - Pretty good shine, horrible shelf life, doesn't matter if I tighten it as hard as I can, within a month the top will be yellow.
Blue Magic - Blue...looks cool. Good shelf life, decent shine, worse than mothers. Always seems to leave some kind of haze on it.
These are all that I've tried so far. I know the the buffing compounds (tripolio, followed by white rouge and jewelers) will bring out the best shine, but that contains alot of work and costs alot more.
And polishes like Flitz and Wenol have to be ordered half the time and cost twice as much as the ones above for a less amount. Still want to play around with them though.
Others I was not a fan of, Auto-Sol... minor scratching, Turtle Wax... sucked.
Any others, or opinions welcomed.
------------------
91 Z28
Best Time Slip:
60' - 2.098
1/8 - 9.137 , MPH - 76.21
1/4 - 14.213, MPH - 97.55
Performace Mods: B&B Exhaust, few free mods.
Appearance Mods: SS wheels, 2.5" Cowl Hood... New 100% Black paint job, Clear Side Marker Lights
Stereo: Alpine 855, Infinity Kappas all around, Infinity 150x2 amp (POS), Infinity Perfect 10 in hatch.
Pictures are Here
ICQ: 1437212
AOL: normalmatt9
Eagle One (one with jewelers rouge). Excellent shine, Comes off easier than most, has a good shelf life.
Never Dull (eagle one as well I believe). Pretty good shine, don't need one towel to apply and one to take off since it comes in cotton like form. Shelf life is great, works well.
Mothers - Pretty good shine, horrible shelf life, doesn't matter if I tighten it as hard as I can, within a month the top will be yellow.
Blue Magic - Blue...looks cool. Good shelf life, decent shine, worse than mothers. Always seems to leave some kind of haze on it.
These are all that I've tried so far. I know the the buffing compounds (tripolio, followed by white rouge and jewelers) will bring out the best shine, but that contains alot of work and costs alot more.
And polishes like Flitz and Wenol have to be ordered half the time and cost twice as much as the ones above for a less amount. Still want to play around with them though.
Others I was not a fan of, Auto-Sol... minor scratching, Turtle Wax... sucked.
Any others, or opinions welcomed.
------------------
91 Z28
Best Time Slip:
60' - 2.098
1/8 - 9.137 , MPH - 76.21
1/4 - 14.213, MPH - 97.55
Performace Mods: B&B Exhaust, few free mods.
Appearance Mods: SS wheels, 2.5" Cowl Hood... New 100% Black paint job, Clear Side Marker Lights
Stereo: Alpine 855, Infinity Kappas all around, Infinity 150x2 amp (POS), Infinity Perfect 10 in hatch.
Pictures are Here
ICQ: 1437212
AOL: normalmatt9
#2
Senior Member
Join Date: Aug 2001
Location: Friendswood(Houston),Texas,USA
Posts: 563
Likes: 0
Received 0 Likes
on
0 Posts
Can you test Flitz and Brasso for us?
------------------
Chevy World Home Page Tripod Home Page Speak up for our hot rodding rights!!!
------------------
Chevy World Home Page Tripod Home Page Speak up for our hot rodding rights!!!
#3
Senior Member
Join Date: Feb 2000
Location: College Station/Spring, TX
Posts: 536
Likes: 0
Received 0 Likes
on
0 Posts
i use brasso on my rims and it works pretty good. the harder/longer you rubb them the cleaner they get. i also have tried rubbing mothers aluminum polish using 4 odd steel wool to get the small scratches/water stains out.
------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-305 5spd...Jamex Springs...and thats just about it!Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://ScreaminDeamin.cz28.com
------------------
Brandon
"ScreaminDeamin 360"
350 60 over, TRW forged 9.83:1 pistons,Hooker Comp headers, crane cam 216/228 .484/.512, crane 1.6 RR's, ported plenum, home made ram air, 24lb SVO injectors, crane AFPR, all going through 3 inch mandrel pipe and a flowmaster.
New project-89 IROC-305 5spd...Jamex Springs...and thats just about it!Soon- 6 speed, Pro 5.0 shifter and 4.10's
http://ScreaminDeamin.cz28.com
#6
I used brasso the other day on my other cars alloy rims and it worked ok, took a LOT of work though, Why not try silvo?
------------------
Nobody ever got cancer from smoking tires!
gibsandwich@hotmail.com
Get ICQ Page My ICQ
ICQ # 18562788
------------------
1982 Z28 Camaro
305ci LG4, Muncie 4-Speed, Holley Carburettor (CFM Unknown), 2.5" Stainless steel exhaust all the way through.
Fibreglass hood.
Boston 4x6" CX7e 2-ways, 6x9" Nippon America (no-name?) 3-ways
Other stuff I haven't figured out yet.
------------------
Nobody ever got cancer from smoking tires!
gibsandwich@hotmail.com
Get ICQ Page My ICQ
ICQ # 18562788
------------------
1982 Z28 Camaro
305ci LG4, Muncie 4-Speed, Holley Carburettor (CFM Unknown), 2.5" Stainless steel exhaust all the way through.
Fibreglass hood.
Boston 4x6" CX7e 2-ways, 6x9" Nippon America (no-name?) 3-ways
Other stuff I haven't figured out yet.
#7
Supreme Member
Join Date: Jun 2000
Location: NJ,USA
Posts: 1,300
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Trans Am
Engine: GMPP 350 V8
Transmission: 700R4
Axle/Gears: 3.23
Never Dull is my favorite.
------------------
1983 TransAm
1984 TransAm
1994 TransAm GT
1994 25th TransAm GT
1990 T-Bird SC
1971 Boss 351
Four TransAm's are not enough. Firebirds for all.
------------------
1983 TransAm
1984 TransAm
1994 TransAm GT
1994 25th TransAm GT
1990 T-Bird SC
1971 Boss 351
Four TransAm's are not enough. Firebirds for all.
Trending Topics
#8
Supreme Member
Thread Starter
Join Date: Oct 2000
Location: Warner Robins, Ga
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 350 TPI
Transmission: 700R4
I'll probably get around to trying flitz in the near future. Mothers does leave a little haze, not nearly as bad as blue magic however. I'm still a big fan of Eagle One products. The never dull and the paste are very good for cost.
#9
Supreme Member
Thread Starter
Join Date: Oct 2000
Location: Warner Robins, Ga
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 350 TPI
Transmission: 700R4
I gave flitz a try. Good stuff. The liquid polish (3.4oz) ran me 5.30$ at a local store. It goes quickly. I would ran it up there with any of the other polishes. Has ZERO haze, very very easy to take off, and shine like never before. Good stuff, only bad thing is it doesn't seem to have much effect on anything other than light amounts of dirt/brake dust and so on. It would not be good to try and restore anything. But then again, it doesn't say anywhere on it that it's a great restorer.
------------------
91 Z28
Best Time Slip:
60' - 2.098
1/8 - 9.137 , MPH - 76.21
1/4 - 14.213, MPH - 97.55
Performace Mods: B&B Exhaust, few free mods.
Appearance Mods: SS wheels, 2.5" Cowl Hood... New 100% Black paint job, Clear Side Marker Lights
Stereo: Alpine 855, Infinity Kappas all around, Infinity 150x2 amp (POS), Infinity Perfect 10 in hatch.
Pictures are Here
ICQ: 1437212
AOL: normalmatt9
------------------
91 Z28
Best Time Slip:
60' - 2.098
1/8 - 9.137 , MPH - 76.21
1/4 - 14.213, MPH - 97.55
Performace Mods: B&B Exhaust, few free mods.
Appearance Mods: SS wheels, 2.5" Cowl Hood... New 100% Black paint job, Clear Side Marker Lights
Stereo: Alpine 855, Infinity Kappas all around, Infinity 150x2 amp (POS), Infinity Perfect 10 in hatch.
Pictures are Here
ICQ: 1437212
AOL: normalmatt9
#13
Supreme Member
Thread Starter
Join Date: Oct 2000
Location: Warner Robins, Ga
Posts: 1,780
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 350 TPI
Transmission: 700R4
I have now have wizard, I've also tried flitz. Never tried some of the others though.
But my car is in the shop, I'll give wizards a try when I get it back. My original statement above was written last Nov., someone brought this back from the dead.
But my car is in the shop, I'll give wizards a try when I get it back. My original statement above was written last Nov., someone brought this back from the dead.
Thread
Thread Starter
Forum
Replies
Last Post
bigjay89gta
Engine/Drivetrain/Suspension Parts for Sale
12
10-15-2015 08:04 AM
sjorgens
Suspension and Chassis
7
10-01-2015 07:54 PM