Please, need wheel specs.
#1
Thread Starter
Supreme Member
iTrader: (1)
Joined: Jul 1999
Posts: 1,416
Likes: 23
From: Stavanger area, Norway
Car: 86 IROC Convt
Engine: 305TPI
Transmission: TH700R4
Please, need wheel specs.
Im ready to order new wheels for the IROC,
could someone give me the necessary specs..? I would really appreciate it. I did look through the old posts, but couldn't find all the info.
Im going with 17x9.5 all around.
I need the back spacing and the bolt pattern.
Thanks a whole lot!!
Ken
------------------
Bright red 86 Iroc-Z Choo Choo Customs Convertible
A few free mods
ChevyKen's Camaros
Administrator @ ChevyWorld.net (Now in a BRAND NEW Design)
could someone give me the necessary specs..? I would really appreciate it. I did look through the old posts, but couldn't find all the info.
Im going with 17x9.5 all around.
I need the back spacing and the bolt pattern.
Thanks a whole lot!!
Ken
------------------
Bright red 86 Iroc-Z Choo Choo Customs Convertible
A few free mods
ChevyKen's Camaros
Administrator @ ChevyWorld.net (Now in a BRAND NEW Design)
#3
Supporter/Moderator
Joined: Sep 1999
Posts: 888
Likes: 3
From: West Hartford, CT
Car: '89 Z28tt
Engine: Dart Little M Twin Turbo
Transmission: T56
Ken,
For 17x9.5, you'll need around 5mm positive offset to fit in the front. Max backspacing is 4.95" front and 5.85" rear. I've put together a wheel sizing faq at http://www.skulte.com/adapterfaq.html .
One of the available 17x9.5's with +5mm offset is the ROH ZS - Pictures at http://www.skulte.com/rims.html . If the available rims don't float your boat, you can always run 4th gen and Vette rims with adapters. HTH!
Andris
For 17x9.5, you'll need around 5mm positive offset to fit in the front. Max backspacing is 4.95" front and 5.85" rear. I've put together a wheel sizing faq at http://www.skulte.com/adapterfaq.html .
One of the available 17x9.5's with +5mm offset is the ROH ZS - Pictures at http://www.skulte.com/rims.html . If the available rims don't float your boat, you can always run 4th gen and Vette rims with adapters. HTH!
Andris
Thread
Thread Starter
Forum
Replies
Last Post
drptop70ss
Engine/Drivetrain/Suspension Wanted
3
10-04-2015 09:44 PM