88 Iroc in Paint (finally)
#1
Thread Starter
Member
Joined: Apr 2003
Posts: 369
Likes: 1
From: San Diego
Car: 88 5.7 Iroc, 2000 SS
Engine: Vortec Hot cam TPI/LS1
Transmission: Pro-Built/T-56
88 Iroc in Paint (finally)
Well, after a long, long while, along with a long wait My car is finally getting painted.
Here is a preview of what to expect, sorry for the low quality. once it's done the whells should come in a few weeks (ordered already)
Let me know what you think.
Here is a preview of what to expect, sorry for the low quality. once it's done the whells should come in a few weeks (ordered already)
Let me know what you think.
#5
Thread Starter
Member
Joined: Apr 2003
Posts: 369
Likes: 1
From: San Diego
Car: 88 5.7 Iroc, 2000 SS
Engine: Vortec Hot cam TPI/LS1
Transmission: Pro-Built/T-56
thanks,
I believe it's called viper steel gray pearl metallic. came on Dodge vipers only for like 00' and 01'
The car will have all the stock iroc badges, and decals, and stripes when done. Only holding out on wether to put the Iroc door decal back on or not. probably leaning towards doing it.
The wheels will be a suprise, I've only seen one other car on these boards with the same wheels I'm gettting.
The hood vents are getting repainted as well.
The pics above do not do the car justice, once it's wet sanded and bufffed it should look insane
I believe it's called viper steel gray pearl metallic. came on Dodge vipers only for like 00' and 01'
The car will have all the stock iroc badges, and decals, and stripes when done. Only holding out on wether to put the Iroc door decal back on or not. probably leaning towards doing it.
The wheels will be a suprise, I've only seen one other car on these boards with the same wheels I'm gettting.
The hood vents are getting repainted as well.
The pics above do not do the car justice, once it's wet sanded and bufffed it should look insane
Trending Topics
#11
Thread Starter
Member
Joined: Apr 2003
Posts: 369
Likes: 1
From: San Diego
Car: 88 5.7 Iroc, 2000 SS
Engine: Vortec Hot cam TPI/LS1
Transmission: Pro-Built/T-56
82 Firebird - It was a gunmetal gray car, and the jams will be done later. Not a perfect paint job, but pretty close. they guy who did it specializes in low riders, and other show cars.
Camaros Rus - I'm waiting on intro to get done, sorry no big wheels here -17" -8" in frt, and 10" in the back- 18" would have looked better but I didn't want the ride of 18's - (5 spoke,dished)
89Firebird- looks good - pretty similar- is that gunmetal?
Camaros Rus - I'm waiting on intro to get done, sorry no big wheels here -17" -8" in frt, and 10" in the back- 18" would have looked better but I didn't want the ride of 18's - (5 spoke,dished)
89Firebird- looks good - pretty similar- is that gunmetal?
#12
Senior Member
iTrader: (1)
Joined: Nov 2002
Posts: 889
Likes: 0
From: Kansas City
Car: 1991 Trans Am
Engine: L98
Transmission: T56
can you give me some info on the paint? thats the exact color i want to replaint my gunmetal grey 91 and want to get the paint code and maybe even some prices if you dont mind.
#13
Supreme Member
iTrader: (1)
Joined: Jul 2005
Posts: 2,435
Likes: 1
From: Rockville, Maryland
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
thats the color i was thinking of. i wanted to change mine a little from the stock gunmetal, but not too much so i wouldnt have to do jambs and such very thoroughly. let me see how it turns out comparing the quarter panel to the door jam. i will be painting myself so i could probably figure out if i would wanna do it or not. thanks a lot.
Last edited by ZZ4 86 Z28; 01-23-2006 at 07:35 PM.
#14
Thread Starter
Member
Joined: Apr 2003
Posts: 369
Likes: 1
From: San Diego
Car: 88 5.7 Iroc, 2000 SS
Engine: Vortec Hot cam TPI/LS1
Transmission: Pro-Built/T-56
Came out of the booth today. Got the lower stripes put on.
still waiting for wet sanding and buffing......
Car is that shiney strait out of the booth.
still waiting for wet sanding and buffing......
Car is that shiney strait out of the booth.
#15
Thread Starter
Member
Joined: Apr 2003
Posts: 369
Likes: 1
From: San Diego
Car: 88 5.7 Iroc, 2000 SS
Engine: Vortec Hot cam TPI/LS1
Transmission: Pro-Built/T-56
Sorry I don't know the code, I'll see if I can get it. Materials at cost I believe is arround $500.
another pic..
oh yeah in the 1st one there are no stripes and the hood is cracked open. it doesn't have a gap in the front, now the trunk lid is a different story..
another pic..
oh yeah in the 1st one there are no stripes and the hood is cracked open. it doesn't have a gap in the front, now the trunk lid is a different story..
#17
Supreme Member
iTrader: (1)
Joined: Jul 2005
Posts: 2,435
Likes: 1
From: Rockville, Maryland
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
why would you lay down stripes before sanding and buffing? actually, do you mean painting stripes? or the ones that run along the bottom above the gfx? if you are talking about the stickers you should put those on later. what kind of wheels are they? i might wanna see some better pics of them.
#18
Thread Starter
Member
Joined: Apr 2003
Posts: 369
Likes: 1
From: San Diego
Car: 88 5.7 Iroc, 2000 SS
Engine: Vortec Hot cam TPI/LS1
Transmission: Pro-Built/T-56
ZZ4, I'm not actually doing the work so I don't know the resoning. and yes these are just the bottom two Iroc stripes(tape)
The wheels are classic ARE 5 stars 16x8 on 255 kuhmos
This car is not getting any painted stripes or graphics, just me but I prefer Irocs with the "stock " look, lowered with wheels....Think they are good looking the way they came from GM. but I know every one has their own tastes..
The wheels are classic ARE 5 stars 16x8 on 255 kuhmos
This car is not getting any painted stripes or graphics, just me but I prefer Irocs with the "stock " look, lowered with wheels....Think they are good looking the way they came from GM. but I know every one has their own tastes..
#19
Member
Joined: Nov 2004
Posts: 205
Likes: 0
From: Virginia Beach, Virginia
Car: Firebird
Engine: 2.8
Transmission: 5spd
my color is like gunmetal..but i mixed it myself at the shop. We can mix up any paint. It has lots of metallics on it when you look at it in light. I did my jambs and everything. I need ot put everything back together. I paid 300 for materials and its R-M finishes paint which is made by basf.
#20
Junior Member
Joined: Nov 2005
Posts: 7
Likes: 0
From: Thompson, CT
Car: 85 Mustang LX 5.0 Coupe, 87 Camaro 5.0, 99 Expedition, NASCAR Pro Stock
Engine: 302-306-305-355-4.6L
Transmission: 5 Speeds, Auto, Sag. 3 Speed
I would be interested in the rims that are on the car. Can you email me at shenett_john@bentley.edu? I would like to see some pics of all 4 rims, and i would like to see what you want for them.
#22
Senior Member
iTrader: (1)
Joined: Nov 2002
Posts: 889
Likes: 0
From: Kansas City
Car: 1991 Trans Am
Engine: L98
Transmission: T56
Originally posted by Kennerz
Sorry I don't know the code, I'll see if I can get it. Materials at cost I believe is arround $500.
another pic..
oh yeah in the 1st one there are no stripes and the hood is cracked open. it doesn't have a gap in the front, now the trunk lid is a different story..
Sorry I don't know the code, I'll see if I can get it. Materials at cost I believe is arround $500.
another pic..
oh yeah in the 1st one there are no stripes and the hood is cracked open. it doesn't have a gap in the front, now the trunk lid is a different story..
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
Polo Z03
Auto Detailing and Appearance
7
09-10-2015 06:43 PM
mustangman65_79
Body
3
08-11-2015 03:17 PM