I like them shaved and clean, do you?
#51
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,355
Received 60 Likes
on
46 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
I have seen them do that hidden light thing on a truck in a mag I have. Its really not that hard, but I just don't have the budget for it right now. Maybe in a year or so after the car is done.
What they do is fit the light in there so it sits flush plus a tinny bit. Then fill the edges with body filler. Then they grind and sand down the light so that it is smooth with the body. They mask off the light and paint the car with like 3 out of 5 coats, then on the last 2 the uncover it. Add some clear coats and done. You see the light through the paint. Def a Bad *** Idea.
What they do is fit the light in there so it sits flush plus a tinny bit. Then fill the edges with body filler. Then they grind and sand down the light so that it is smooth with the body. They mask off the light and paint the car with like 3 out of 5 coats, then on the last 2 the uncover it. Add some clear coats and done. You see the light through the paint. Def a Bad *** Idea.
#52
Member
Join Date: Feb 2005
Location: Marengo, IL
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Ranger
Engine: 2.3L
Transmission: Stick - Shift like a man!
Sounds cool Maybe I'll try that with some of the lights on my Cavalier I want to get it as smooooth as possible with hardly any lines lol.
Dennis, I'm still putt-puttin' thru your pages. I knew about the 335's out back, but are you seriously running 245 fronts?! That's pretty massive, haha. When I eventually get around to building a Firebird, it's gonna be running skinnies/fatties Not the best handling, but I don't need or want an Auto-X/Road Rally car.
Dennis, I'm still putt-puttin' thru your pages. I knew about the 335's out back, but are you seriously running 245 fronts?! That's pretty massive, haha. When I eventually get around to building a Firebird, it's gonna be running skinnies/fatties Not the best handling, but I don't need or want an Auto-X/Road Rally car.
#53
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,355
Received 60 Likes
on
46 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
jrmaatta. You asked if i am gonna be running 245s up front,....thats not too big, but to answer your question. No I am not running 245s up front.
I am gonna be running 275s
Front: 17x9.5........ 275/45/17s.......with 2"spacers
Back: 17x11".........335/35/17s........with 2" spacers
The back will most likely go down to 315 and the spacers will be machined down to tuck them under a bit more
Just cuz I love pics...
here is a 12 bolt with 335s on it
and there is that rolled under the car.
I am gonna be running 275s
Front: 17x9.5........ 275/45/17s.......with 2"spacers
Back: 17x11".........335/35/17s........with 2" spacers
The back will most likely go down to 315 and the spacers will be machined down to tuck them under a bit more
Just cuz I love pics...
here is a 12 bolt with 335s on it
and there is that rolled under the car.
Last edited by dennisbernal91z; 12-09-2005 at 01:05 PM.
#54
Member
Join Date: Feb 2005
Location: Marengo, IL
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Ranger
Engine: 2.3L
Transmission: Stick - Shift like a man!
Yea, I saw those pics. You got a pretty good deal on the 335's Why not just tub the back since you already have the tires??
#55
Senior Member
iTrader: (3)
Join Date: Dec 2004
Location: Mass, Boston
Posts: 638
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 GTA Black notchback
Engine: 1991 L98 355 TWIN Superchagred
Transmission: 700r4 shift kit 2500 stall
Axle/Gears: www.cardomain.com/id/gtafanatic
GOOD JOB MAN that a real good looking ride i like the rear end set up real sweet
#57
Member
Join Date: Feb 2005
Location: Marengo, IL
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Ranger
Engine: 2.3L
Transmission: Stick - Shift like a man!
Another option if you want the shaved look, but still have a physical handle, is the C3 Vette handles.
Altho I just looked at some Firebird pics while I was over at CD, and it wouldn't work the same way on an F-body w/o some pretty heavy modification to the door.
Altho I just looked at some Firebird pics while I was over at CD, and it wouldn't work the same way on an F-body w/o some pretty heavy modification to the door.
#58
Junior Member
Thread Starter
Join Date: May 2002
Location: Beloeil, QC, Canada
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
Here's another pic, I shaved the marker, mirrors and lowered it a bit more. I think it looks pretty bad ***. Anyone has info on alternative rear view mirrors: AKA cameras? 2 LCD screens in dash showing rear view thru cameras could be very sweet.
#59
Junior Member
Thread Starter
Join Date: May 2002
Location: Beloeil, QC, Canada
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
I've been toying with the idea of a cool graphic theme. White/Orange or White/Flat black is what Im looking for. I did this quick photoshop, what do you think of it?
Image removed- Please read the rules. Thanks.
Image removed- Please read the rules. Thanks.
Last edited by MetalliCamaroRS; 12-10-2005 at 01:20 PM.
#60
Senior Member
Join Date: Jul 2002
Location: South East MI
Posts: 754
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS AKA Big Nasty
Engine: Carbed '79 350 block, 360hp/380ftlbs (flywheel)
Transmission: 6speed from an unidentified 4th gen. ask me, ill tell you.
4th gen T/A mirrors look pretty cool and pretty much are a bolt on
#61
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,355
Received 60 Likes
on
46 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
They look OK at best I think. IMHO I think the stock ones go well with the body lines. If you want to make it look even more "slick" then paint the "gasket" that goes between the mirror and the door right were the mirror mounts. It makes it look more integrated. I might go this route, but am afraid of having the painted plastic peel off after a while. Dunno if it is worth the it.
hmm....
hmm....
#63
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,355
Received 60 Likes
on
46 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Thanks. I will tell that to the guys that are gonna paint the car early next year.
Maybe I will do it. The PS of my car has it done to it and it looks great.
Maybe I will do it. The PS of my car has it done to it and it looks great.
#65
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,355
Received 60 Likes
on
46 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
anyone else think the no side mirror idea is really cool, but looks really strange, almost too strange?
I might do it, but no side mirrrors is just so strange.
Looks like a person with no arms or something.
Anyone ever had the idea to try and make the GFX vents on a 91-92 functional. I am toying with the idea of shoving some ducting in there and running the air to the brakes. I know my car is just a street car, and I def don't need them, but I just hate things that are not funtional so much.
I might do it, but no side mirrrors is just so strange.
Looks like a person with no arms or something.
Anyone ever had the idea to try and make the GFX vents on a 91-92 functional. I am toying with the idea of shoving some ducting in there and running the air to the brakes. I know my car is just a street car, and I def don't need them, but I just hate things that are not funtional so much.
#66
Member
Join Date: Feb 2005
Location: Marengo, IL
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Ranger
Engine: 2.3L
Transmission: Stick - Shift like a man!
It does look a lil weird, but it wouldn't hurt to actually try it, take pics (don't forget to post them on TGO!!! lol) and see how you and others like it I don't think I've seen any P-shops of your car, only that white one above haha.
I can't even imagine your car in one color all finished up Not even in a P-shop
I can't even imagine your car in one color all finished up Not even in a P-shop
#67
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,355
Received 60 Likes
on
46 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Right. Well the PS was not started off as my car. It could have been. It did start out as a Actic white Z28. But yeah I can't imagine it done either. I will be getting my hands on a cervini hood within the next few weeks. Then Start dropping off parts at the paint shop. TONS of advancment will happen between the 23rd and the 9th of Jan. I have no work and have no school. Def gonna finish the pipes and wiring and fire her up for the first time.
And hopefully start to pic up painted parts and bolt then on, i.e. fenders, hood, nose, doors, hatch. Then early Jan maybe find a way to get it towed to the shop for the final spray.
Man I am exited this thing is getting real close to the end!!!!!
I haven't drivin her for 2.5 years!!
as for the mirrors, maybe next year.
And hopefully start to pic up painted parts and bolt then on, i.e. fenders, hood, nose, doors, hatch. Then early Jan maybe find a way to get it towed to the shop for the final spray.
Man I am exited this thing is getting real close to the end!!!!!
I haven't drivin her for 2.5 years!!
as for the mirrors, maybe next year.
#68
Member
Join Date: Feb 2005
Location: Marengo, IL
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Ranger
Engine: 2.3L
Transmission: Stick - Shift like a man!
Congrats, I can't wait to see finished pics lol. Ever since before I joined this site (cruised it for awhile), I remember seeing In-Progress pics of your Camaro
I just wish I'd known about this site when I had my Firebird, I prolly woulda kept it than. Or at least sold it to a fellow enthuiast rather than a super-shady used car dealer I miss her...
I just wish I'd known about this site when I had my Firebird, I prolly woulda kept it than. Or at least sold it to a fellow enthuiast rather than a super-shady used car dealer I miss her...
#70
Supreme Member
iTrader: (1)
Join Date: Jun 2002
Location: Woodstock, GA
Posts: 2,259
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Trans Am
I'm all for 4th gen Firebird mirrors...on a Firebird. I helped Redraif put hers on, and I believe it was the first on this board to have that done. I just have never thought they would look right on a Camaro, since it is more angular. I'm not sure they would look right on any car without a Ram Air style hood, though. Maybe C5 Vette mirrors, with the stalk cut down a bit so they don't stick out so much?
#71
Supreme Member
iTrader: (30)
Join Date: Sep 2005
Location: O'Fallon, MO
Posts: 6,258
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
Originally posted by dennisbernal91z
jrmaatta. You asked if i am gonna be running 245s up front,....thats not too big, but to answer your question. No I am not running 245s up front.
and there is that rolled under the car.
jrmaatta. You asked if i am gonna be running 245s up front,....thats not too big, but to answer your question. No I am not running 245s up front.
and there is that rolled under the car.
what exhaust is on that Z28?
#72
Member
Join Date: Feb 2005
Location: Marengo, IL
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Ranger
Engine: 2.3L
Transmission: Stick - Shift like a man!
BlueZee, I'm not positive on that pic, but I know that he's putting 3" out on it. The mid-section will be like 2.5"x5" oval I think?? He's got a monster of a motor that needs to exhale
#73
Supreme Member
iTrader: (30)
Join Date: Sep 2005
Location: O'Fallon, MO
Posts: 6,258
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1991 Z28 convertible built 3/1/1990
Engine: Cammed 6.0L LSX
Transmission: T56
Axle/Gears: custom Ford 8.8", 4.10 gears
i'm gonna be buying exhaust in the summer, and i want something that looks like that, some nice rolled tips, but i dont want mine to stick out past the bumper. most likely i'll make them stick INSIDE the bumper about an inch
#74
Member
Join Date: Feb 2005
Location: Marengo, IL
Posts: 335
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 Ranger
Engine: 2.3L
Transmission: Stick - Shift like a man!
That would look good When I had my Firebird, the shop that replaced the muffler made it stick out WAY too far
#75
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,355
Received 60 Likes
on
46 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
hey guys. Those pics are of my cars old pipes
That was just a simple flowmaster cat back that was on the car when I bought it. What makes it look good are the 4" angle cut, rolled chrome tips. Only about 18 bucks installed. (welded on)
Really easy to make it look good.
The new pipes are hooker long tubes, coated. Then spintech oval pipes till i get past the spohn x-member and stuff, then go back to round 3". Then 2 3" dynomax bullets and dumped before the axle aimed out the sides a bit.
Hope that fills you in a bit, there are a ton more pics of that exhaust on my site. somewhere in the low teens i think (page wise)
Later
-Dennis
That was just a simple flowmaster cat back that was on the car when I bought it. What makes it look good are the 4" angle cut, rolled chrome tips. Only about 18 bucks installed. (welded on)
Really easy to make it look good.
The new pipes are hooker long tubes, coated. Then spintech oval pipes till i get past the spohn x-member and stuff, then go back to round 3". Then 2 3" dynomax bullets and dumped before the axle aimed out the sides a bit.
Hope that fills you in a bit, there are a ton more pics of that exhaust on my site. somewhere in the low teens i think (page wise)
Later
-Dennis
#76
Supreme Member
iTrader: (1)
Join Date: Dec 2003
Location: Queens, NY
Posts: 1,342
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC Z28
Engine: Custom Forged 355
Transmission: 700R4
Axle/Gears: 9" 4:11's Detroit Locker
i have my side markers shaved....hell i have everything shaved....cept da gas cap....never got in any trouble for it...lol
#77
Supreme Member
iTrader: (1)
Join Date: Jul 2005
Location: Rockville, Maryland
Posts: 2,435
Likes: 0
Received 1 Like
on
1 Post
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
then put some pics up
#78
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,355
Received 60 Likes
on
46 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Well if your not in trouble then, I might have to do the same too Looks slick. Keep up the good work.
#79
Supreme Member
iTrader: (1)
Join Date: Dec 2003
Location: Queens, NY
Posts: 1,342
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC Z28
Engine: Custom Forged 355
Transmission: 700R4
Axle/Gears: 9" 4:11's Detroit Locker
http://www.cardomain.com/ride/435668
there u go....plenty of pics of b4 and after ....from stock adn ****ty....to a phat *** custom in my opinion....but thats jus me
there u go....plenty of pics of b4 and after ....from stock adn ****ty....to a phat *** custom in my opinion....but thats jus me
#80
Supreme Member
iTrader: (1)
Join Date: Jul 2005
Location: Rockville, Maryland
Posts: 2,435
Likes: 0
Received 1 Like
on
1 Post
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
one of the nices third gens ever. the only thing i would do is lose the hood and the blackouts for the tails. instead i would nightshade the tails with maybe 2-3 coats. and get an ss hood. even still, the nicest third gen ive seen to date.
#81
Supreme Member
iTrader: (2)
Join Date: Feb 2005
Location: West Warwick RI, postal code: 02893
Posts: 4,355
Received 60 Likes
on
46 Posts
Car: Building LS3, T56 Z28
Engine: LS3
Transmission: T-56
Axle/Gears: Moser/ 4.11
Def looks great. The hood is not bad, but I don't like it. The balckouts are cool. As from what i hear the SS hood has major problems on the DS having a hump on it.
Anyways great job
Anyways great job
#82
Supreme Member
iTrader: (1)
Join Date: Jul 2005
Location: Rockville, Maryland
Posts: 2,435
Likes: 0
Received 1 Like
on
1 Post
Car: 1986 Z28 Camaro Gunmetal Gray with
Engine: GM Crate ZZZ HO 350, Edelbrock head
Transmission: Rebuilt 700r4 all TransGo and Beast
Axle/Gears: 10 bolt with 3.73 gears
yea i could have bought a brand new ascd ss hood locally for like 250. but it had that bump, he said it was the third one he got after exchanging and he was sick of all the shipping. even a stock iroc hood with blisters would look awesome on it, especailly with the iroc rims.
#83
Supreme Member
iTrader: (1)
Join Date: Dec 2003
Location: Queens, NY
Posts: 1,342
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 IROC Z28
Engine: Custom Forged 355
Transmission: 700R4
Axle/Gears: 9" 4:11's Detroit Locker
well thank you guys....took me a year or so to do it all...on da weekends at my shop....100% of da work was done by me and only me....and i was 19 when i started on it...but yeax...i took the blackouts off and polished the tails..looks a million bux better....as for the hood...im gonna have to get rid of it...not enough room for my blower on the new monster motor......again...thank u guys for da compliment
#84
Supreme Member
Join Date: Apr 2001
Location: Changing Tires
Posts: 5,675
Likes: 0
Received 3 Likes
on
3 Posts
Car: too many ...
Originally posted by Charged350
http://www.cardomain.com/ride/435668
there u go....plenty of pics of b4 and after ....from stock adn ****ty....to a phat *** custom in my opinion....but thats jus me
http://www.cardomain.com/ride/435668
there u go....plenty of pics of b4 and after ....from stock adn ****ty....to a phat *** custom in my opinion....but thats jus me
Thread
Thread Starter
Forum
Replies
Last Post
sailtexas186548
Engine/Drivetrain/Suspension Parts for Sale
8
02-17-2017 03:07 PM