x007

Hi all,


I have ordered an Aje K-member whit Pinto Rack manual kit &
A-arm.

Its now installed in part at less, not completly done since i still wait for part
(i receive some wrong part from aje). I will post more info & detail of the install as soon as everyting finished.

Here is somes pictures ;

x007

More pics

x007

another picture

xpndbl3

iTrader: (5)

looks really nice, I got mine in the black, now I'm thinking the red would have looked sharper and stood out more.

x007

That make some color

You need to do like me, build a powercoating oven
I powercoat all my part now, the k-member was already powercoated btw..
I do myself the endlink union that came in bare metal for some reason.

That k-member make a lot of room and nice looking to !
----------
Hey, 1 question,

The tapper bolt that goes to the spindle on your, does the stopper goes to the spindle ?

On mine the stopper those' nt go on the spindle, i emailed aje about this and wait a reply... I think you could see it on the pics i posted.

//<86TA>\\

iTrader: (15)

might be a dumb question, but how do you jack up the front of the car with the tubular k-members?

x007

i think right on the main beam, that should be strong enough, like on the orig. k-member.

xpndbl3

iTrader: (5)

x007 can you circle a pic of what you're talking about?

x007

Here it is.
threre is no way to have it all the way to the stoper, bolt to big or hole to small

70GTO

x007,
That whole set-up looks just Great, Very Nice!!
By the way what front spindle set-up do you have installed.

Bruce

x007

Thats stock spindle (powercoated in new), i moded it a bit
on the caliper braket since i have a wilwood caliper/wilwood light disk
setup that goes on it.

xpndbl3

iTrader: (5)

powdercoating must have made that bolt hole a little smaller so it needs to be reamed out slightly.

x007

no, already sanded to bare metal & tighted whit a gun, it look like the bolt is to big.. So on your setup the stopper goes all the way trhu it then?