Post Your Carb'd Motor Pics
#351
Supreme Member
Join Date: Mar 2003
Location: Severn, MD.
Posts: 1,301
Likes: 0
Received 0 Likes
on
0 Posts
Car: '88 T/A and '90 T/A
Engine: LB9/383
Transmission: T5/700R4
The 6" rod will make more peak and like a higher RPM and the shorter rods will make a tad bit more torque and will peak tq and hp wise a little lower.
#353
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Okay, where'd you get that air cleaner decal? I've been looking for one of those.
#354
Moderator
iTrader: (5)
Hey, Five7,
If you're still running the dual snorkel and I believe you are, you'll love this decal, which was made to fit that application (I bought, hoping to use the dual snorkel on my new motor, but since it won't fit the carb, I modified the decal). Check out the following link--the part number is DC1047, $10.50 + shipping:
Here's the direct link:
http://osborn-reproduction.com/catal..._Position=PAR:
Home page:
http://osborn-reproduction.com/
Though the name of the company includes "reproduction," the decal had GM stamped on the backing paper. At any rate, original or repo, the decal is first-rate.
That said, a local print shop can surprise you. Note what I had made for the rockers and rear bumper. Looks stock, IMO (If you'd like the template that I used, let me know):
JamesC
If you're still running the dual snorkel and I believe you are, you'll love this decal, which was made to fit that application (I bought, hoping to use the dual snorkel on my new motor, but since it won't fit the carb, I modified the decal). Check out the following link--the part number is DC1047, $10.50 + shipping:
Here's the direct link:
http://osborn-reproduction.com/catal..._Position=PAR:
Home page:
http://osborn-reproduction.com/
Though the name of the company includes "reproduction," the decal had GM stamped on the backing paper. At any rate, original or repo, the decal is first-rate.
That said, a local print shop can surprise you. Note what I had made for the rockers and rear bumper. Looks stock, IMO (If you'd like the template that I used, let me know):
JamesC
Last edited by JamesC; 08-27-2005 at 07:00 AM.
#355
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Took awhile to navigate their site, but got there.
Thanks. I've been searching eBay for months for that thing.
Thanks. I've been searching eBay for months for that thing.
#356
Member
Join Date: Jul 2001
Location: Noblesville In
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 sports coupe-83 berlinetta
Engine: 5.0 in the sports coupe-350 in the berlinetta
Transmission: 700r4 in the sports coupe-turbo-350 with a 2500 stal in the berlinetta
I have been looking for that decal since 1989.
#357
Member
Join Date: Jul 2001
Location: Noblesville In
Posts: 334
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 sports coupe-83 berlinetta
Engine: 5.0 in the sports coupe-350 in the berlinetta
Transmission: 700r4 in the sports coupe-turbo-350 with a 2500 stal in the berlinetta
Wow I wonder if they can make the bumper decal for the 83-84 5.0 liter bumper decal for the Z/28s but instead of 5.0 put a 5.7 on it. Im all about factory looking stuff!
#358
Supreme Member
Join Date: Mar 2005
Location: Honolulu, HI
Posts: 1,539
Likes: 0
Received 0 Likes
on
0 Posts
Car: 2011 SS/RS
Engine: LS3
Transmission: Tremic6060
Axle/Gears: good enough
heres my carbed 2.8 v6 that decided to Kill its oil pump
Excuse it's dirt its useally a daily driver, but its sitting right now awaiting a new oil pump....
Excuse it's dirt its useally a daily driver, but its sitting right now awaiting a new oil pump....
#361
Junior Member
Join Date: Aug 2005
Location: Kingsland, GA
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 Z28 Indy Pace Car
Engine: 350 HO 4bbl
Transmission: TH350
JamesC
Thanks for the link! It's great. I also liked the Z28 emblem with the 5.7 liter HO decal and then the Irocz center cap!
#363
Senior Member
Join Date: Sep 2003
Location: Mo.
Posts: 892
Likes: 0
Received 0 Likes
on
0 Posts
Car: Z/28
Engine: 355
Transmission: Turbo 400
Axle/Gears: 3.73
anybody got any pics like these to show? How many have been down this road and tell about their OOPS?
Last edited by RWB____s; 06-21-2006 at 03:39 AM.
#365
Moderator
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
A thread like that was started on the Tech forum a couple of years ago. Let's not go there with this thread.
#366
Senior Member
Join Date: Sep 2003
Location: Mo.
Posts: 892
Likes: 0
Received 0 Likes
on
0 Posts
Car: Z/28
Engine: 355
Transmission: Turbo 400
Axle/Gears: 3.73
Ok, Lets give it a happy ending. It started like that and ended like this.
Last edited by RWB____s; 06-21-2006 at 03:39 AM.
#367
Senior Member
iTrader: (3)
Join Date: Apr 2005
Location: Hickory, NC
Posts: 890
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS, 1993 Camaro Z-28
Engine: what engine, LT1
Transmission: did it come with one, 4l60
Axle/Gears: They spin (most of the time)
Good ending...What kind of Carb it that
#369
Senior Member
Join Date: Sep 2003
Location: Mo.
Posts: 892
Likes: 0
Received 0 Likes
on
0 Posts
Car: Z/28
Engine: 355
Transmission: Turbo 400
Axle/Gears: 3.73
Originally posted by BT283
Good ending...What kind of Carb it that
Good ending...What kind of Carb it that
#370
Supreme Member
Join Date: Jun 2001
Location: Calgary, Alberta, Republic of Western Canada
Posts: 3,238
Likes: 0
Received 4 Likes
on
4 Posts
Car: 1986 Sport Coupé
Engine: 305-4v
Transmission: 700R4 and TransGo2
Originally posted by RWB____s
Ok, Lets give it a happy ending. It started like that and ended like this.
Ok, Lets give it a happy ending. It started like that and ended like this.
#373
Junior Member
Join Date: Jan 2004
Location: greenville south carolina
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1982 camaro Z28
Engine: 350, comp cams magnum 282h cam, edelbrock performer rpm intake, carter 625 cfm carb, msd hei upgrade kit, milodon gear drive, crane cams 1.6 rollers, more 2 come!!
Transmission: th350, 2600 stall, stage 3 shift kit
here's mine
#377
Junior Member
Join Date: Apr 2002
Location: Brooks, KY
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Here is a pic after getting the motor into the car. It has definately been a long 2 1/2 years, but finally starting to think that I may get to drive it this year.
Let me know what you think....
Let me know what you think....
#378
Senior Member
still working on my eng bay and 406!!! do you like your eng bay flat black???i was thinking that or semi gloss black. even though i have a red car and will be painting it red again soon. good lookin motor!!!
#380
Junior Member
Join Date: Apr 2002
Location: Brooks, KY
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by bigdavesiroc
still working on my eng bay and 406!!! do you like your eng bay flat black???i was thinking that or semi gloss black. even though i have a red car and will be painting it red again soon. good lookin motor!!!
still working on my eng bay and 406!!! do you like your eng bay flat black???i was thinking that or semi gloss black. even though i have a red car and will be painting it red again soon. good lookin motor!!!
David
#381
Senior Member
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
http://memimage.cardomain.net/member...33_14_full.jpg
Just got her started last night. Vortec 383 baby!
Excuse the mess for now, havent had a chance to hook up the gauges, and get the under hood "beautification" up to par
Just got her started last night. Vortec 383 baby!
Excuse the mess for now, havent had a chance to hook up the gauges, and get the under hood "beautification" up to par
#383
Junior Member
Join Date: Oct 2004
Location: Foley, Al.
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 IROC Z28 and 99 Nissan Altima
Engine: 305 TPI / KA24DE on N2O
Transmission: 700r4
updated pics
vid.
http://videos.streetfire.net/player....0-110F97DB4C52
310
Edelbrock Performer 600 carb
Edelbrock Performer Intake
Hooker long tubes
K&N
and some small things I'm forgetting
Last edited by jksstar; 10-07-2005 at 08:05 PM.
#385
Member
iTrader: (6)
Join Date: Feb 2000
Location: Valley Center,Kansas
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92RS
Engine: LS 402 inwork
Transmission: TH350
Axle/Gears: 10 bolt,3:73's
Here's my newest 383 in my 92. A few minor details include:
Eagle 4340 crank and rods, AFR 195's, Comp 286XE hyd roller, Speed-Pro forged flat-tops, Demon 750.
Eagle 4340 crank and rods, AFR 195's, Comp 286XE hyd roller, Speed-Pro forged flat-tops, Demon 750.
#386
Senior Member
iTrader: (9)
Join Date: Nov 2004
Location: Buford, GA
Posts: 996
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: 6.3L Megasquirted HSR
Transmission: T56
Axle/Gears: 3.70 Posi 9 bolt
Originally posted by Slush92RS
Here's my newest 383 in my 92. A few minor details include:
Eagle 4340 crank and rods, AFR 195's, Comp 286XE hyd roller, Speed-Pro forged flat-tops, Demon 750.
Here's my newest 383 in my 92. A few minor details include:
Eagle 4340 crank and rods, AFR 195's, Comp 286XE hyd roller, Speed-Pro forged flat-tops, Demon 750.
#387
Member
iTrader: (6)
Join Date: Feb 2000
Location: Valley Center,Kansas
Posts: 404
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92RS
Engine: LS 402 inwork
Transmission: TH350
Axle/Gears: 10 bolt,3:73's
Originally posted by spills
I've always loved those valve covers. If they werent so damned expensive, and would fit center bolts, Id get em!
I've always loved those valve covers. If they werent so damned expensive, and would fit center bolts, Id get em!
#389
Member
Join Date: Oct 2001
Location: S.Jersey
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
Car: 88 Camaro
Engine: 355
Transmission: TH-350
Originally posted by Slush92RS
Here's my newest 383 in my 92. A few minor details include:
Eagle 4340 crank and rods, AFR 195's, Comp 286XE hyd roller, Speed-Pro forged flat-tops, Demon 750.
Here's my newest 383 in my 92. A few minor details include:
Eagle 4340 crank and rods, AFR 195's, Comp 286XE hyd roller, Speed-Pro forged flat-tops, Demon 750.
Very Very Nice looking engine and bay!
#397
Supreme Member
iTrader: (1)
Join Date: Nov 2003
Location: Davenport, Iowa
Posts: 1,598
Likes: 0
Received 2 Likes
on
2 Posts
Car: Still a 3rd Gen
Engine: 450HP 355
Transmission: TH350
Axle/Gears: 9" with 4.11's
here is how mine sits...
Hopefully i'll get the rest of the gaskets i need and redo the main fuel line and have it back on the road soon...
Hopefully i'll get the rest of the gaskets i need and redo the main fuel line and have it back on the road soon...
#398
Supreme Member
iTrader: (3)
Join Date: Sep 2005
Location: MD
Posts: 1,685
Likes: 0
Received 3 Likes
on
3 Posts
Car: '88 IROC-Z medium orange metallic
Engine: L98
Transmission: 700R4
Axle/Gears: 3.27
Man you need to tame that wiring! That and I don't think the alternator is going to do any good where it is
#399
Supreme Member
iTrader: (1)
Join Date: Nov 2003
Location: Davenport, Iowa
Posts: 1,598
Likes: 0
Received 2 Likes
on
2 Posts
Car: Still a 3rd Gen
Engine: 450HP 355
Transmission: TH350
Axle/Gears: 9" with 4.11's
Originally posted by Dialed_In
Man you need to tame that wiring! That and I don't think the alternator is going to do any good where it is
Man you need to tame that wiring! That and I don't think the alternator is going to do any good where it is
Yah, it was all loomed before i ripped the top end off the engine. I want to figure out what i need and don't need and hopefully rip most of it out. I allready ripped out the old engine harness and computer last summer.
meh, the alt works fine right there.
#400
Supreme Member
iTrader: (3)
Join Date: Sep 2005
Location: MD
Posts: 1,685
Likes: 0
Received 3 Likes
on
3 Posts
Car: '88 IROC-Z medium orange metallic
Engine: L98
Transmission: 700R4
Axle/Gears: 3.27
Originally posted by Purple82TA
hahaha
Yah, it was all loomed before i ripped the top end off the engine. I want to figure out what i need and don't need and hopefully rip most of it out. I allready ripped out the old engine harness and computer last summer.
meh, the alt works fine right there.
hahaha
Yah, it was all loomed before i ripped the top end off the engine. I want to figure out what i need and don't need and hopefully rip most of it out. I allready ripped out the old engine harness and computer last summer.
meh, the alt works fine right there.