91RockS

FOR SALE:

LT1 Cam from a 1995 Z28 85,000 miles. This is a great performance boost for a TBI L03/L05 at a very low cost. I can cut the dowel pin down for buyer upon request (LT1 cams had longer dowel pin than Gen 1 small blocks).

Cam is in excellent shape. No worn lobes. See pics

Casting # GMPT BC 17 242 is engraved on the cam body.

Specs should be: 93-95 LT1 205/207 @ 0.050" .450"/.460" Lift, LSA 117

$60.00 includes shipping. U.S. only.

Private message me if you are interested

SiCkRs

iTrader: (6)

Would this be a good upgrade for a 350tpi engine too and what else would i need to install this

Timinsk

iTrader: (9)

hopefully this last till next week, i'll have money then

91RockS

The LT1 wil have more lift than your stock cam, so you may need new valve springs. Do some searches on you stock valve springs to find out max lift they can handle before coil bind. Other that that, all you need is elbow grease along with seals & gaskets for timing cover, water pump, and intake manifold.

Timinsk

iTrader: (9)

what would i need to do, i own a L03

91RockS

IMO, the LT1 cam is a great upgrade for a L03 motor. The L03 has a wimpy peanut cam, so the LT1 cam will provde a big performance boost. I would recommend changing valve springs with this cam if you are still running the stockers, which can be done without removing the heads.

A TBI car will benefit from retuning the ecm with this cam swap, although you could probably get away with running the stock bin and bump up fuel pressure as others have done.

There are some very good stickies in the TBI forum to walk you through the details of this cam swap. I've done it. It's not difficult, you just need the motivation and patience to wrench on your motor.

Let me know if you are interested. The cam is still available.

Timinsk

iTrader: (9)

debating.. also i'm looking to still pass emissions that's another thing as well, and maybe keeping or slightly getting better gas mileage? trying to curve it both ways, i know it sounds irrealistic but the 4th gens got good gas mileage imo...

805camaro805

If i put this cam into my 305 tbi would i be able to pass my emissions

91RockS

Cam is still for sale.

Chezoom

iTrader: (2)

if i didnt just buy headers, you wouldnt have this anymore
trade for anything, everything i have is in my sig

Saabster

iTrader: (2)

Does anyone know the intake centerline of this cam, I can't find it anywhere.

Chezoom

iTrader: (2)

pmed

91RockS

Sold

sheapesz

Do yuo still have the cam thanks so much

blackjack12982

The post above you say's, "Cam is sold"? Boy that leaves alot of questions...


Not too mention, the thread is 3 years old.

watajob

iTrader: (29)