[RI] 86 Z28 305 Automatic Black / Gold
#1
Thread Starter
Joined: Aug 1999
Posts: 5,079
Likes: 376
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
86 Z28 305 Automatic Black / Gold
$3800.
See a fully detailed listing here:
http://providence.craigslist.org/cto/4002883699.html
Feel free to send a ma PM with any specific qeustions that you might have.
SERIOUS ONLY PLEASE !
See a fully detailed listing here:
http://providence.craigslist.org/cto/4002883699.html
Feel free to send a ma PM with any specific qeustions that you might have.
SERIOUS ONLY PLEASE !
Last edited by John in RI; 08-27-2013 at 09:25 AM.
#2
Thread Starter
Joined: Aug 1999
Posts: 5,079
Likes: 376
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: 86 Z28 305 Automatic Black / Gold
The 2.73 peg leg disk brake rear end that was installed had a hum when coasting,... so it was removed and a 3.23 POSI disk Brake rear end was installed this weekend.
Price bumped up to $3900.
Craigslist add was removed because I needed to update it to reflect the rear end swap. Feel free to post questions here or PM for asdditional info.
Price bumped up to $3900.
Craigslist add was removed because I needed to update it to reflect the rear end swap. Feel free to post questions here or PM for asdditional info.
#3
Thread Starter
Joined: Aug 1999
Posts: 5,079
Likes: 376
From: RI
Car: 1984 Camaro Berlinetta
Engine: LT1
Transmission: T56 6-speed
Axle/Gears: 4.11 LS1 Rear End
Re: 86 Z28 305 Automatic Black / Gold
Quick Update,
I had a tire blow out and met a stone wall @ pretty low speed. Wrecked the driver fender, headlight bar, parking light and the front bumper cover. Also put a a(nother) ding in the corner of the hood.
After removing the busted parts I had no damage to the frame in any way,
Reinstalled a real good front bumper cover and a black fender that was in better shape than the one that was crunched. ( first bumper cover had a hole near pass parking light that could be seen in first pics posted. ) I used a different chin spoiler too - but only because this one did not have 2 holes drilled at the beak ( first spoiler had a front plate that was improperly mounted.)
After the 'Nose Job' the price is: The same.
P.S. I've also mounted another 245-50-16" tire on the Gold wheel. It's not a match for the other tires and the car should get a new pair of matching Front tires. The back tires are OK, but it's got POSI now & - well - Ya' know,........
I had a tire blow out and met a stone wall @ pretty low speed. Wrecked the driver fender, headlight bar, parking light and the front bumper cover. Also put a a(nother) ding in the corner of the hood.
After removing the busted parts I had no damage to the frame in any way,
Reinstalled a real good front bumper cover and a black fender that was in better shape than the one that was crunched. ( first bumper cover had a hole near pass parking light that could be seen in first pics posted. ) I used a different chin spoiler too - but only because this one did not have 2 holes drilled at the beak ( first spoiler had a front plate that was improperly mounted.)
After the 'Nose Job' the price is: The same.
P.S. I've also mounted another 245-50-16" tire on the Gold wheel. It's not a match for the other tires and the car should get a new pair of matching Front tires. The back tires are OK, but it's got POSI now & - well - Ya' know,........
Thread
Thread Starter
Forum
Replies
Last Post
colton_carlson
Firebirds for Sale
7
03-08-2019 01:21 PM
kah992
Engine/Drivetrain/Suspension Parts for Sale
2
08-19-2015 03:55 PM